Kärcher submersible pump SP 22.000 Dirt Level Sensor

Maximum motor power (W): 750
Maximum flow rate (l/h): approx. 22000
Temperature of water to be pumped out (°C): max. 35
Delivery head (m): 8
Pressure (bar): max. 0.8
Particle size (mm): max. 30
Submergence depth (m): max. 7
Run-on time (s): 15
Min. residual water, manual (mm): 35
Residual water height (mm): 35
Connection thread: G1 1/2
Connection thread on pressure side: G1/2 internal thread
Connection cable (m): 10
Voltage (V): 230 - 240
Frequency (Hz): 50
Weight without accessories (kg): 6.7
Weight incl. packaging (kg): 7.7
Dimensions (length x width x height) (mm): 238 x 293 x 354

The separately adjustable level sensor starts the dirty water pump SP 22.000 Dirt Level Sensor immediately on contact with water. If the water level drops below the level sensor again, the pump will automatically shut down after 15 seconds.
The extremely powerful submersible pump is ideally suited for draining large garden ponds, flooded basements or construction pits, for example, as it can reliably pump out dirty water (dirt particles up to 30 mm) at a rate of up to 22,000 l/h. For water with even larger dirt particles, the integrated, pull-out stainless steel pre-filter protects against blockages.
The submersible pump can also be switched to continuous operation using the automatic/manual switch. It can pump water down to a residual water level of 35 millimetres – both in continuous operation and in automatic mode, if the level sensor is set accordingly.
Hoses of 1", 1 1/4" and 1 1/2" can be connected without complications using the Quick Connect connection thread.
Thanks to the stainless steel housing and the robust plain shaft seal, the pump has a particularly long service life.

Ceramic seal
For a particularly long service life

Level sensor
For infinitely variable setting of the switch-on and switch-off points on pumps.

Quick Connect quick-connect
Connection thread for quick and easy connection of 1", 1 1/4" and 1 1/2" hoses to the pump.

Designed for pumping dirty water
For reliable pumping out of dirty water with dirt particles up to 30 mm.

Automatic/manual switch
For switching between automatic and manual mode

Comfortable carrying handle
Comfortable to hold and can also be used as a holder for the fastening.

Robust stainless steel integrated pre-filter
Protects the pump from coarse dirt, protecting the pump motor from blockages.