Teflon grease dry Motip PTFE SPRAY DRY 500ml aerosol

Dry grease with a low coefficient of friction, which does not contain fats or oils. After the solvents have evaporated, it leaves an ultra-thin layer of Teflon powder on the surface, which makes the surfaces slippery, but they remain dry and non-oily and non-greasy. At the same time, the grease is very stable and can withstand high mechanical pressure and temperature fluctuations from -50`C to +250`C.

FIELD OF USE:
Designed for use both in the home and in industries with a lower than usual load, dusty environment and a wide temperature range. Suitable for lubricating all kinds of plastic and metal parts and joints, such as sunroofs, sliding surfaces, door locks, clothes locks, seat guide rails, safety belts, etc.
It is also suitable as a mold lubricant if it is not recommended that the cast part comes into contact with oil.

TECHNICAL INFORMATION:
Base materials: polytetrafluoroethylene
Color: transparent white
Cost: 1.74g/sec
Drying time: approx. 5 min. depending on the outside temperature and the thickness of the layer
Temperature tolerance -50C to +250C

USE:
Before use, store the product at room temperature and shake
Recommended operating temperature +5° to +30°C
Before use, it is recommended to clean the surfaces with MOTIP universal industrial cleaner
Spray the product in thin layers on all surfaces that need to be lubricated.
The dry PTFE layer is formed only after the solvent evaporates (approx. 1 min)
on aerosol lubricants.