Bosch cordless impact wrench GDS 18V-330 H + case, without battery and charger
.jpg)
Official Bosch Dealer
- 100% genuine products
- Manufacturer warranty and service
- Professional consultation
Same tool in another kit
Bosch cordless impact wrench GDS 18V-330 H + case, without battery and charger
Cardboard box
192.51€256.68€-25%3-5 tööpäeva.jpg)
Bosch cordless impact wrench GDS 18V-330 H + L-Boxx, without battery and charger
1/1 L-BOXX contents
214.83€286.44€-25%3-5 tööpäeva.jpg)
Bosch cordless impact wrench GDS 18V-330 H 2 x 5,0 Ah + GAL 18V-40 charger + L-Boxx
Cardboard box · 1/1 L-BOXX insert
398.29€545.60€-27%3-5 tööpäeva.jpg)
Bosch cordless impact wrench GDS 18V-330 H 2 x 4,0 Ah + GAL 18V-40 charger + L-Boxx
1/1 L-BOXX contents
416.39€570.40€-27%3-5 tööpäeva
Batteries and chargers for this product
The Bosch PRO GDS18V-330H is an 18 V impact wrench with a brushless motor for fastening M8–M18 bolts and nuts. It is suitable for metalworking shops, locksmithing, industrial assembly and vehicle maintenance. The maximum tightening torque is 330 Nm and the breakaway torque is 560 Nm.
The compact 145 mm head helps you work in tight spaces, and the tool weighs 1,2 kg without the battery. The tool has a 1/2-inch tool holder with a friction ring and through-hole, an LED light, a status indicator and a belt clip.
Choose from five torque settings: 160, 180, 240, 280 or 330 Nm. The corresponding rotational speeds are 1200, 1500, 1900, 2400 and 2800 p/min. In addition to selecting a setting, you can adjust the speed continuously by varying the pressure on the trigger. SSR helps prevent the socket from getting stuck on the bolt, Time stops the tool after a set time, ABR stops rotation when loosening a nut, and STOP mode stops the tool when the bolt is flush with the surface.
The tool is compatible with batteries and chargers in the Bosch Professional 18 V system, including AMPShare batteries. For maximum performance, Bosch recommends using EXPERT batteries. Use only impact-rated sockets and bits, and make sure the socket is securely attached to the tool holder.
Tightening torque depends on the duration of the impact and the type of joint. According to the manual, maximum torque is reached in approximately 6–10 seconds; check the actual tightening torque with a torque wrench. For a soft or springy joint, the maximum tightening torque is lower than for a rigid joint. Keep the cooling vents clean and, after prolonged use at low speed, let the tool run idle at maximum speed for about three minutes. Supplied in a cardboard box.
Dimensions
Sound & Vibration
Cardboard box
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
Warranty for Bosch Blue Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Bosch website, the warranty is extended to 3 years for both private and business customers.
You can register Blue Series machines here: Registration
For registered products, the extended warranty also applies to batteries and chargers.
Registration is possible only within 4 weeks of purchase.
Warranty for Bosch Green Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Green Bosch website, the warranty is extended to 3 years for both private and business customers.
You can register Green Series machines here: Registration
Registration is possible only within 4 weeks of purchase.
Warranty for Bosch EXPERT Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Bosch website, the warranty for EXPERT Series machines is extended to a total of 5 years for both private and business customers.
You can register EXPERT Series machines here: Registration
Registration is possible only within 4 weeks of purchase. The warranty certificate issued after registration must be kept, as it may be needed in case of a warranty claim.
A consumer (private customer) has the right, pursuant to Estonian Law of Obligations Act §218(2), to submit a warranty claim to the seller within 2 years.
Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
The Bosch PRO GDS18V-330H is an 18 V impact wrench with a brushless motor for fastening M8–M18 bolts and nuts. It is suitable for metalworking shops, locksmithing, industrial assembly and vehicle maintenance. The maximum tightening torque is 330 Nm and the breakaway torque is 560 Nm.
The compact 145 mm head helps you work in tight spaces, and the tool weighs 1,2 kg without the battery. The tool has a 1/2-inch tool holder with a friction ring and through-hole, an LED light, a status indicator and a belt clip.
Choose from five torque settings: 160, 180, 240, 280 or 330 Nm. The corresponding rotational speeds are 1200, 1500, 1900, 2400 and 2800 p/min. In addition to selecting a setting, you can adjust the speed continuously by varying the pressure on the trigger. SSR helps prevent the socket from getting stuck on the bolt, Time stops the tool after a set time, ABR stops rotation when loosening a nut, and STOP mode stops the tool when the bolt is flush with the surface.
The tool is compatible with batteries and chargers in the Bosch Professional 18 V system, including AMPShare batteries. For maximum performance, Bosch recommends using EXPERT batteries. Use only impact-rated sockets and bits, and make sure the socket is securely attached to the tool holder.
Tightening torque depends on the duration of the impact and the type of joint. According to the manual, maximum torque is reached in approximately 6–10 seconds; check the actual tightening torque with a torque wrench. For a soft or springy joint, the maximum tightening torque is lower than for a rigid joint. Keep the cooling vents clean and, after prolonged use at low speed, let the tool run idle at maximum speed for about three minutes. Supplied in a cardboard box.
Technical Specifications
Dimensions
Sound & Vibration
What's in the box
Cardboard box
Shipping & Delivery
Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
Warranty for Bosch Blue Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Bosch website, the warranty is extended to 3 years for both private and business customers.
You can register Blue Series machines here: Registration
For registered products, the extended warranty also applies to batteries and chargers.
Registration is possible only within 4 weeks of purchase.
Warranty for Bosch Green Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Green Bosch website, the warranty is extended to 3 years for both private and business customers.
You can register Green Series machines here: Registration
Registration is possible only within 4 weeks of purchase.
Warranty for Bosch EXPERT Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Bosch website, the warranty for EXPERT Series machines is extended to a total of 5 years for both private and business customers.
You can register EXPERT Series machines here: Registration
Registration is possible only within 4 weeks of purchase. The warranty certificate issued after registration must be kept, as it may be needed in case of a warranty claim.
A consumer (private customer) has the right, pursuant to Estonian Law of Obligations Act §218(2), to submit a warranty claim to the seller within 2 years.
Reviews
This product has no reviews yet. Be the first to rate it.
Bosch cordless impact wrench GDS 18V-330 H + case, without battery and charger
06019L5200