Bosch cordless impact wrench GDS 18V-450P + L-Boxx, without battery and charger
.jpg)
Official Bosch Dealer
- 100% genuine products
- Manufacturer warranty and service
- Professional consultation
Same tool in another kit
.jpg)
Bosch cordless impact wrench GDS18V-450P + case, without battery and charger
Cardboard box
239.01€318.68€-25%3-5 tööpäeva.jpg)
Bosch cordless impact wrench GDS 18V-450P + L-Boxx, without battery and charger
1/1 L-BOXX contents
262.26€349.68€-25%3-5 tööpäeva.jpg)
Bosch cordless impact wrench GDS18V-450P 2 x 5,0 Ah + GAL 18V-40 charger + L-Boxx
1/1 L-BOXX contents
431.78€591.48€-27%3-5 tööpäeva.jpg)
Bosch cordless impact wrench GDS18V-450P 2 x 4,0 Ah + GAL 18V-40 charger + L-Boxx
1/1 L-BOXX contents
448.98€615.04€-27%3-5 tööpäeva
Batteries and chargers for this product
Bosch PRO GDS18V-450P is a brushless 18 V cordless impact wrench for tightening M10–M20 bolts and nuts. It is suitable for metalworking shops, locksmith work, industrial assembly, framing and vehicle maintenance. The maximum tightening torque is 450 Nm and the breakaway torque is 800 Nm.
The tool speed can be selected from five levels, and four screwdriving modes can be selected via the user interface. The SSR function helps prevent the socket from getting stuck on the bolt. The timed shut-off stops the tool after a preset time to reduce the risk of damage to the bolt or workpiece. ABR stops rotation when the nut has been loosened, preventing it from falling off the thread. STOP mode has five sensitivity levels and stops the tool when the bolt is flush with the surface.
The tool has a 1/2-inch square drive, user interface, status indicator, work light and belt clip. The well-balanced tool weighs 1,6 kg without a battery. It is compatible with batteries and chargers from the Bosch Professional 18 V system, as well as AMPShare batteries. For maximum power, the manual recommends using at least a 5,5 Ah ProCORE18V battery or an EXBA18V-55 battery.
Use only impact-rated sockets and bits, and check that the accessory is securely attached in the holder. The actual tightening torque depends on the impact duration: with a hard joint, the maximum is reached in less time; with a soft or springy joint, the maximum is lower and the required impact duration is longer. Check the achieved tightening torque with a torque wrench.
If you work for an extended period at a low rotation speed, then let the tool run at maximum speed without a load for about 3 minutes to cool down. Clean the ventilation slots regularly. Before driving large, long screws into hard material, drill a pilot hole to a depth of about 2/3 of the screw length.
Dimensions
Sound & Vibration
1/1 L-BOXX contents
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
Warranty for Bosch Blue Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Bosch website, the warranty is extended to 3 years for both private and business customers.
You can register Blue Series machines here: Registration
For registered products, the extended warranty also applies to batteries and chargers.
Registration is possible only within 4 weeks of purchase.
Warranty for Bosch Green Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Green Bosch website, the warranty is extended to 3 years for both private and business customers.
You can register Green Series machines here: Registration
Registration is possible only within 4 weeks of purchase.
Warranty for Bosch EXPERT Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Bosch website, the warranty for EXPERT Series machines is extended to a total of 5 years for both private and business customers.
You can register EXPERT Series machines here: Registration
Registration is possible only within 4 weeks of purchase. The warranty certificate issued after registration must be kept, as it may be needed in case of a warranty claim.
A consumer (private customer) has the right, pursuant to Estonian Law of Obligations Act §218(2), to submit a warranty claim to the seller within 2 years.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
Bosch PRO GDS18V-450P is a brushless 18 V cordless impact wrench for tightening M10–M20 bolts and nuts. It is suitable for metalworking shops, locksmith work, industrial assembly, framing and vehicle maintenance. The maximum tightening torque is 450 Nm and the breakaway torque is 800 Nm.
The tool speed can be selected from five levels, and four screwdriving modes can be selected via the user interface. The SSR function helps prevent the socket from getting stuck on the bolt. The timed shut-off stops the tool after a preset time to reduce the risk of damage to the bolt or workpiece. ABR stops rotation when the nut has been loosened, preventing it from falling off the thread. STOP mode has five sensitivity levels and stops the tool when the bolt is flush with the surface.
The tool has a 1/2-inch square drive, user interface, status indicator, work light and belt clip. The well-balanced tool weighs 1,6 kg without a battery. It is compatible with batteries and chargers from the Bosch Professional 18 V system, as well as AMPShare batteries. For maximum power, the manual recommends using at least a 5,5 Ah ProCORE18V battery or an EXBA18V-55 battery.
Use only impact-rated sockets and bits, and check that the accessory is securely attached in the holder. The actual tightening torque depends on the impact duration: with a hard joint, the maximum is reached in less time; with a soft or springy joint, the maximum is lower and the required impact duration is longer. Check the achieved tightening torque with a torque wrench.
If you work for an extended period at a low rotation speed, then let the tool run at maximum speed without a load for about 3 minutes to cool down. Clean the ventilation slots regularly. Before driving large, long screws into hard material, drill a pilot hole to a depth of about 2/3 of the screw length.
Technical Specifications
Dimensions
Sound & Vibration
What's in the box
1/1 L-BOXX contents
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
Warranty for Bosch Blue Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Bosch website, the warranty is extended to 3 years for both private and business customers.
You can register Blue Series machines here: Registration
For registered products, the extended warranty also applies to batteries and chargers.
Registration is possible only within 4 weeks of purchase.
Warranty for Bosch Green Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Green Bosch website, the warranty is extended to 3 years for both private and business customers.
You can register Green Series machines here: Registration
Registration is possible only within 4 weeks of purchase.
Warranty for Bosch EXPERT Series machines
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Bosch website, the warranty for EXPERT Series machines is extended to a total of 5 years for both private and business customers.
You can register EXPERT Series machines here: Registration
Registration is possible only within 4 weeks of purchase. The warranty certificate issued after registration must be kept, as it may be needed in case of a warranty claim.
A consumer (private customer) has the right, pursuant to Estonian Law of Obligations Act §218(2), to submit a warranty claim to the seller within 2 years.
Reviews
This product has no reviews yet. Be the first to rate it.
.jpg)
Bosch cordless impact wrench GDS 18V-450P + L-Boxx, without battery and charger
06019K4301
