Bosch point cross laser GCL 12V-50-22 CG + BT 150, without battery and charger

Battery voltage: 12.0 V
Laser diode: line – 500–540 nm, less than 10 mW; point – 500–540 nm
Operating temperature: -10 – 45 °C
Storage temperature: -20 – 70 °C
Laser class: 2
Working area: up to 25 m
Working area with receiver: 50 m
Leveling accuracy: ± 0.3 mm/m
Maximum working area of laser points: 10 m (up), 10 m (down)
Automatic leveling range: ± 4°
Leveling time: 4 s
Dust and splash protection: IP65 (except battery or battery adapter)
Power supply: 12 V lithium-ion battery, 4 x 1.5 V LR6 (AA)
Maximum operating time:
– 8 h (lithium-ion battery)
– 4 h (4 x AA) in cross-line and point mode
Weight: approx. 0.59 kg
Laser line color: green
Solder point color: green
Projection: 2 lines / 2 points
Plumb point accuracy: ± 0.7 mm/m
Corresponding laser beam receivers: LR 7

Without battery and charger.

Delivery set:
Rotating base RM 20 Professional
Bag
Laser target board
AA1 Alkaline battery adapter
4 × 1.5 V LR6 (AA) battery
Construction tripod BT 150 Professional

Strong 12 V combined laser for reliable alignment
IP65 dust and water protection and a strong rubber housing ensure a carefree and safe work process.
Save time and increase accuracy with the Leveling Remote application, which allows you to control the line hands-free.
Two power sources eliminate downtime: it allows the device to switch between a 12 V lithium-ion battery and AA alkaline batteries.

GCL 12V-50-22 CG Professional is your reliable partner for precision work.
With a strong rubber-coated housing and an IP65 rating, the product is designed to withstand dust and water, so you can focus on the task at hand.
The Leveling Remote application for remote control of laser lines and points reduces the time required for adaptation and allows you to work longer. In addition, with two power sources, you can switch between a 12 V lithium-ion battery and a backup AA alkaline battery, reducing downtime caused by a dead battery and making work smoother.

GCL 12V-50-22 CG is designed for easy and user-friendly use and has a single mode button, battery indicator and a U-shaped laser window for a wider fan angle of the horizontal line.
Perfect for professionals who need precise alignment. Whether you're aligning sockets, installing quad walls or downlights: by carrying points from floor to ceiling, the GCL 12V-50-22 CG Professional makes work easier and more efficient.

In order for you to start work immediately, the laser beam receiver mode of the GCL 12V-50-22 CG is always activated. With the optional laser beam receiver LR 7 Professional, you can extend the working range up to 50 meters.
Green laser lines and points offer up to four times better visibility than red lines, always ensuring flawless work.
Precise positioning of laser lines around plumb points is easily achieved with the RM 20 Professional attachment.