Festool Adapter Plate AP-KA 65

Dimensions length x width: 254 x 420.00 mm
Min installation height: 150.00 mm
Rotatable: 0 - 47 °

Delivery set:
Adapter plate for edge banding device with 15 slide guides
Additional roller

The CONTURO is also suitable for stationary work. For this, it is simply inserted into the multifunctional table MFT/3 or a self-built table with an adapter plate. This allows not only edging straight edges or curves, but also bevels at an angle of 90°–45°, as the CONTURO in the stationary device can be rotated 90°–45°.

Flexible use – the adapter plate can be installed on a self-made table frame or the designated perforated MFT plate
Steplessly adjustable angle in the range of 0–47°
Allows the machine to be tilted in the table and thus horizontal positioning of the workpiece during edging – for comfortable and safe guidance even with large objects
Included slide guides for secure guidance of the workpiece
Ideal edge overhang when using the included slide guides
Quick and tool-free installation and removal of the edge gluing device
Secure fixation of the machine with sliding locks
Additional roller for extending the pressure zone or for edging complex shapes
Adjustable guide fence for precisely parallel feeding of the board during bevel edging, so that the edge does not move out of place
Deflector that keeps the inserted edge away from the workpiece area
The machine's start button is always easily accessible

For using the edge banding tool KA 65 as a stationary device
Adapter plate for installation in the MFT table frame (with hole table plate KA 65, order no. 500366) or separately to the workbench