Festool air cleaner SYS-AIR M

Power: 200 W
Max. volume flow: 680.00 m⊃3;/h
Pre-filter surface area: 8600 cm⊃2;
Main filter surface area: 24600 cm⊃2;
Cable length: 7.50 m
Dimensions (L x W x H): 396 x 296.00 x 437.00 mm
Max. connection value for device socket: 2200 W
Dust class: M
Product weight without accessories: 9.90 kg
Motor type: Mains

Scope of delivery:
pre-filter VF-SYS-AIR
main filter HF-SYS-AIR M

Main applications:
All jobs where dust extraction is not possible or is difficult
Demolition and renovation work
Better air in the workshop

The air cleaner filters airborne harmful dust particles that could not be captured despite expert dust extraction. This prevents dust particles from settling in the environment.
Thanks to its compact Systainer format and low weight, it is particularly suitable for mobile use. The powerful two-stage filter system ensures extensive air purification. The smallest dust particles and other contaminants that could otherwise cause serious illnesses are filtered out of the air. This means less cleaning, greater cleanliness around you, and better air quality.

Handy and light
Low weight under 10 kg, practical Systainer format and carrying handle.

Very powerful
With an intake volume of 680 m⊃3;/h, the air in rooms up to 57 m⊃2; can be purified with three air changes.

Expandable
If necessary – e.g. to increase air circulation in large rooms – up to six air cleaners can be connected in series.

Additional socket
Mains socket for connecting a vacuum cleaner, power tools and additional air cleaners.

Adjustable intake volume
Depending on the need, the fan speed can be set to two different levels. First level Eco mode, second level maximum air circulation.

Directed airflow
The purified air flows upwards in three directions: left, right, and back. This stirs up less dust and creates fewer disturbing air currents.

Two-stage filter system
A pre-filter captures a large proportion of airborne dust. This saves the main filter. The pre-filter is cost-effective and can be replaced easily and quickly.

Large filter surface
The main filter, designed in a TripleV shape, has an exceptionally large filter surface. The advantages are slower clogging and thus a long filter service life. The filter is designed for dust class M.

Dust class M
Dust class M for harmful dusts with limit values of > 0.1 mg/m⊃3;. Effectively filters wood dust and mineral dusts. Separation efficiency >99.9%.

Reliable signal
Indicates filter contamination. Glows green when the filter is good and sufficient. Glows red when the filter is too heavily contaminated and the required air exchange rate is no longer achieved.

Air supply hose
For hard-to-reach areas or dust protection walls. The air supply hose with a large diameter of 200 mm and an adapter plate is the right accessory for this.

Compatible
Connectable to all Festool Systainers and vacuum cleaners thanks to T-LOC. The air cleaner in Systainer⊃3; M437 format can be easily integrated into bott vehicle equipment.

Movable base
The SYS-AIR can be easily transported with the roller board SYS-RB or a vacuum cleaner.

Flexible application area
Mobile on the construction site or securely installed in the workshop and space-savingly stored. The air cleaner can be flexibly used with a ceiling mount (accessory).

No cable clutter
The Systainer lid provides a secure and safe place for the power cable. This prevents it from getting in the way during transport or storage.

FlowDetect
Health protection: the volumetric flow control monitors the minimum air speed and warns if the speed drops below the minimum.

Fan speed
Depending on the need, the fan speed can be set to two different levels. First level Eco mode, second level maximum air circulation.