Festool cordless drill-screwdriver C 18 HPC 4,0 I-Set

Main applications:
Installation of furniture and kitchen furniture
Installation of fittings, rear walls, moldings
Installation of doors and windows, drilling and screwing of wood, metal and plastic
Erection of fences, pergolas, carports, awnings
Production of wooden substructures

For complete flexibility in drilling and screwing: fully electronic torque adjustment, CENTROTEC quick-change system, angle and eccentric adapters and depth stop are of great help in every drilling and screwing job.
The combination of Li-HighPower battery and brushless and therefore maintenance-free EC-TEC motor makes the cordless drill-screwdriver C 18 light, long-lasting and durable. Full Festool service for cordless drills and batteries makes everyday work worry-free.
Available in a unique C-shaped design or – depending on individual preference – also as a device in a T 18+3 T-shaped design.

Intelligent engine management
The brushless EC-TEC motor does not wear out during operation and uses the energy of the batteries practically without losses to achieve optimal power. In addition to the above, the electronic engine management system ensures an extremely long service life: microprocessors control and manage the temperature, voltage and electrical consumption of the engine, electronics and battery.

Super light and durable
The Li-HighPower Compact battery provides full power – at a significantly lower weight. For even longer endurance, the brushless and maintenance-free EC-TEC motor always activates only as much power as is needed for an individual screwing order.

Precise work
The handy and perfectly balanced C-design allows very precise positioning thanks to the position of the handle on the drilling and screwing axis.

In tight conditions
Like all Festool cordless drill-screwdrivers, the C 18 can also insert bits into the direct spindle attachment.

6 bits always within reach
The practical bit holder has room for up to six bits – magnetically protected against falling out.

In the tightest space
The angle chuck is ideal for screwing around corners and accessing hidden screws in tight corners.

Closer to the edge
The eccentric chuck allows easy access to every screw.

CENTROTEC quick-change system
Faster switching between drilling, countersinking and screwing: The CENTROTEC quick-change system is a drill chuck and bit holder in one, and it is 50% smaller and 80% lighter than a conventional drill chuck. Hexagonal tools are centered with balls – for optimal power transmission and 10 times better concentricity.

Drill holder for standard tools
The drill chuck with a standard width of up to 13 mm also allows the use of all standard bits and drills. Tool-free installation with Fastfix interface.

Optimal power usage
Fully electronic torque adjustment and shutdown for optimal power in any working situation. The torque set for screwing is maintained, even if drilling is done with maximum torque in the meantime.

Optimally illuminated
With the integrated LED light, you can work precisely even in dark corners.

Blades and drills always at hand
The screwdriver is supplied in a practical Systainer with a lid and drawer, in which suitable accessories – be they long drill bits, small parts or drill cassettes – are correctly stored and quickly at hand. For easy transport from the workshop to the construction site, Systainer⊃3; can be perfectly integrated into the bott vehicle equipment.

Electronic
Adjustable speed for working suitable for the material.

FastFix
Facilitates the replacement of tools used for milling, sawing, planing, grinding, drilling and screwing.

Torque shutdown
Smart technology gives the optimal force for each material when screwing.

Lithium-ion battery
Equipment with high-performance lithium-ion batteries.

EC-TEC motor
The EC-TEC drive concept represents unusual performance with the lowest possible energy consumption.

AIRSTREAM
Batteries can be reused faster thanks to AIRSTREAM technology (cooling function for faster availability) and significantly higher charging power