Festool cordless hammer drill KHC 18 5,0 EBI-Plus

Main applications:
Ideal for impact drilling holes up to Ø 18 mm in concrete, stone and masonry (max Ø 26 mm)
Also suitable for light chiselling work, for example, to remove plaster, putty or ceramic tiles from the substrate; smaller penetrations and holes in sandstone and masonry
Versatile applications thanks to the interchangeable SDS-Plus and quick-release chuck. Thus, it is ideal for impact drilling, chiselling, non-impact drilling and screwing
Fastening building components to concrete and masonry with fasteners (Ø > 10 mm), e.g. anchors, concrete screws
Fastening building frames, steel components, wooden structures, e.g. lintels, posts
Fastening substructures, suspended ceilings and other elements (Ø 5–10 mm) to concrete and masonry
For fastening kitchen cabinets, wall shelves, soundproofing elements, plasterboard, skirting boards
Drilling and screwing without impact, e.g. when drilling ceramic tiles
Drills up to Ø 30 mm in wood, up to Ø 13 mm in steel and other materials
Up to Ø 68 mm socket drill bits for silicate brick and masonry
Mixing smaller amounts of mortar, plaster or paint with a mixing stick
Working with a vacuum cleaner – Bluetooth® battery automatically starts the Bluetooth®-enabled mobile vacuum cleaner in AUTO mode

The battery combi-hammer drill KHC 18 is strong and durable thanks to the powerful brushless EC-TEC motor and pneumatic impact mechanism and can withstand extremely high loads.
2.6 J of impact energy will get you to your destination quickly. Whether impact drilling, non-impact drilling, screwing or chiselling - these different functions can be switched quickly: The SDS-Plus drill chuck can be exchanged for a quick-release chuck with one movement.
As a practical accessory, the suction device reduces dust in every use, and thanks to the connection of the vacuum cleaner and the Bluetooth® remote control to a smart system, you can work dust-free and even more comfortably.

Faster to the result
2.6 J of impact energy ensures good material removal when chiselling and the fast movement of the drill when impact drilling. Ideal for impact drilling up to Ø 18 mm in concrete (maximum possible Ø 26 mm).

Versatile applications
Suitable for impact drilling, chiselling and non-impact drilling. Different uses can be activated with the function switch. You can change the direction of rotation to screw in and out screws.

Two drill chucks - versatile applications
The KHC 18 offers a wide range of functions thanks to the tool-free drill chuck change. Impact drills, drill bits and chisels are attached to the SDS-Plus drill chuck. The quick-release drill chuck expands the range of tools used, for example, with drills with a cylindrical shank and drills with a hexagonal shank, bits and bit holders.

Powerful and long-lasting
The brushless EC-TEC motor does not wear out during operation and uses the energy of the batteries practically without losses to achieve optimal power.

In a low-dust system
The KHC 18 is very easy to combine with a well-thought-out suction device (available as an accessory) and thus you can use all the advantages of the Festool suction system. The suction device is fixed to the depth stop and connected to the vacuum cleaner. Bluetooth® batteries communicate with the Bluetooth® module of the CLEANTEC mobile vacuum cleaner (model CT 26/36/48 later available as an accessory) and automatically start the mobile vacuum cleaner when the battery tool is switched on.

Ensures greater work safety
The electronic KickbackStop acts in the opposite direction to the dangerous twisting of the wrist in the event of the drill's unexpected jamming or blocking and thus ensures greater work safety.

Health-saving work
The vibration damper absorbs and dampens the impact energy before it is transferred to the hands. Using an ergonomic handle offers additional support when used with high force.

Precise work
Simply install the depth stop on the additional handle and set it without tools.

Point-accurate drilling
The new SDS impact drills (optional) allow very precise approach thanks to the 90° sharp centering tip. The fully metal head ensures an extremely long service life, especially when drilling reinforced concrete.

Optimally illuminated
With the integrated LED light, you can work precisely even in dark corners.

Safe storage
The switch-on lock prevents the machine from starting accidentally. When hung on the end of the scaffolding hook, the combi-hammer KHC 18 is also best protected against falling from great heights.

Festool 18 V Bluetooth® battery kits
The 5.0 Ah Bluetooth® battery kits included in the delivery kit are compatible with all Festool 18 V products. And they can be perfectly combined with the remote start of the vacuum cleaner - machine on, vacuum cleaner on.

Reverse stop
Allows hammer impact without spindle rotation to simplify chiselling work with concrete, stone and masonry.

KickbackStop
The electronic KickbackStop acts in the opposite direction to the dangerous twisting of the wrist in the event of the drill's unexpected jamming or blocking and thus ensures greater work safety.

EC-TEC motor
The EC-TEC drive concept represents unusual performance with the lowest possible energy consumption.

Electronic
Adjustable speed for working suitable for the material.

Safety clutch
A mechanical sliding clutch protects the tool in the event of unexpected blocking or tilting.

SDS-plus holder
Tool holder for quick tool change.

Bluetooth® interface
For wireless connection to end devices.

Impact stop
Allows manual deactivation of the hammer impact when drilling in wood or brittle materials.

Lithium-ion battery
Equipped with high-performance lithium-ion batteries.