Festool guide rail for cross cut FSK 670

Click – and it’s done.
You can easily connect the FSK guide rail with a circular saw or a plunge-cut saw and choose the length that suits your requirements: 250 mm, 420 mm or 670 mm.
This creates a mobile and easy-to-use cross-cutting system for making precise cuts at the intended angle in just a few simple steps.

Advantages:
Compatible circular saws and plunge-cut saws can be easily connected to the guide rail using the quick coupling to form a single tool. Efficient cross-cuts are ensured by quick positioning on the workpiece. With a cutting length of 670 mm, it is also suitable for trimming OSB chipboard. Repeatedly precise and correctly angled cross-cuts thanks to precise guidance. Kickback stop returns the saw to the starting position after the sawing process is complete. Splinter guard for splinter-free sawing. Adhesive pad strip protects the workpiece surface from damage. Sliding cover for easy movement of the machine on the guide rail

Intended use:Cutting panel materials up to 670 mm wide (e.g. OSB boards)|Cutting insulation boards

The mobile cross-cutting system consisting of a guide rail and a circular saw makes work easier with fast, guided, and correctly angled cross-cuts. The kickback stop returns the saw to the starting position after the sawing process is complete, and the stop system ensures precise repetition of angled cuts. The connectable guide rail with a quick coupling is the ideal addition to compatible circular saws and plunge-cut saws.

The sliding cover ensures the machine moves smoothly on the cross-cutting guide rail. The kickback stop returns the saw to the starting position after the sawing process. The stop system for repeated precise angled cuts. The adhesive strip holds the rail firmly in place and protects the surface at the same time. Circular saws can be quickly connected to or disconnected from the cross-cutting guide rail. Depending on this, you can saw with the rail or freehand. The rubber flange directly on the marking protects the edges from tearing as a splinter guard – even when making angled cuts.

Connectable cross-cutting system for repeated angled cuts. Secure fixing of workpieces thanks to the screw clamp, which can be conveniently attached to the groove of the cross-cutting rail|flexibly adjustable angles|locking points make it easier to quickly set the most important angles

Not just sawing, but cross-cutting.