Festool eccentric sander ROTEX RO 90 DX FEQ-Plus

Main applications:
Sanding paints and varnishes from window frames
Ideal for work on vertical surfaces or overhead
Sanding of groove and spring plate connections
Sanding in corners, edges - in any narrow place
Sanding of lamellas with a special sole
Performing SPOT-REPAIR applications in the body area

Four devices in one: Smaller soles. Greater selection. The new transmission eccentric sander ROTEX RO 90 impresses with the recognized ROTEX principle for coarse, fine sanding and polishing. Now also in the corner: the sanding or polishing sole is replaced with a triangular sole with a FastFix interface and the ROTEX RO 90 becomes a delta sander.

Strong 4:1 solution
For the first time, coarse sanding, fine sanding, polishing and delta sanding with only one device. Lower acquisition costs, maximum flexibility, greater area of use. Even more efficient and time-saving on the construction site and during assembly.

Coarse sanding
The greatest sanding power with the ROTEX rotating movement: The overlap of eccentric movements and rotary movements ensures a strong removal in a short time.

Fine sanding
Classic eccentric movement for intermediate and fine sanding. Ultra-fine sanding, first-class surface quality.

Corners
Unique in the world: The Stickfix sanding sole turns the ROTEX into a triangular sander. The greatest sanding power in corners, edge corners and edges on small surfaces.

Polishing
Brilliant results without significant heating of the surface with the ROTEX rotating movement and Festool polishing agents and polishing sponges.

Up to three times more efficient removal
The high-torque ROTEX motor and the combination of eccentric and rotary movement sand significantly more than a conventional eccentric sander. The strong eccentric shaft bearing ensures an even longer service life.

Protects the sanding sole and the workpiece
Safe and kickback-free sanding to the edges with the PROTECTOR - in three sizes for different corners and window frames.

Efficient disc brake
The sole brake prevents the sanding sole from rotating. This avoids sanding marks on the surface and saves from redoing.

Cost-effective operation
The delta sanding sole and the sanding tool tip can be used three times by turning it.

Extremely light - extremely high performance
The highest surface quality in fine sanding and polishing.

Short set-up times
With the FastFix interface, you can quickly and without tools change the sanding sole, polishing sole and triangular sole.

Faster sanding tool change
Every detail plays a role in achieving the perfect quality of the surface. Therefore, Festool sanding tools can be quickly changed with the practical StickFix system and they attach reliably and without slipping.

Light and ergonomic
Thanks to different grip positions, especially ergonomic Softgrip zones and low weight, the ROTEX RO 90 can be easily controlled with one hand, vertically and overhead.

Health-saving and dust-free
Optimal dust extraction on the recognized Jetstream principle. Less dust, less heat generation and less clogging of the sanding tool and Velcro.

Because cleanliness equals health
Clean workplace with Festool CT series mobile vacuum cleaners. Compact and light, ideal for installation work and therefore a great addition to the ROTEX RO 90.

Pure eccentric movement & ROTEX rotary movement
The eccentric movement alone ensures an ultra-smooth result. When you add a rotary movement, you achieve high polishing speed and exceptional gloss level when polishing high-gloss surfaces.

Ideal for assembly
Invincible as a team: transmission eccentric sander ROTEX RO 90 DX and Systainer vacuum cleaner CTL SYS. With the RO 90 DX, the surfaces are perfect and efficient suction on the Jetstream principle transports the dust directly to the vacuum cleaner CTL SYS. The device socket with automatic on and off starts the CTL SYS immediately after starting the connected RO 90.

Antistatic function
Mobile vacuum cleaners and machines with an antistatic function against the formation of static charge during operation.

CLEANTEC
Integrated bayonet joint as a connecting element between the vacuum cleaner and the tool.

MMC electronic multi-material control
Working suitable for the material: Power electronics "Multi Material Control" with adjustable, constant rotational speed and temperature monitoring.

FastFix
Facilitates the replacement of tools used for milling, sawing, planing, sanding, drilling and screwing.

Jetstream principle
Less dust, less heat, few deposits - thanks to the 9-hole principle. Up to 30% longer durability.

Protector
Protects the grinding disc and the material when working close to the edge.

MPE sanding sole
Sanding soles and sanding discs made of extremely wear-resistant material for a longer service life.

plug it
Removable, replaceable mains cable with safety lock for quick equipment change.

StickFix STF
Quick closing principle for attaching sanding tools - without glue and clamps - for greater economy.