Festool guide rail FS 1400/2-KP

Length: 1400 mm

Scope of delivery:
adhesive pad FS-KP/30

Invented and perfected by Festool: guide rail with adhesive pads.
Allows for straight and precise cuts both when working horizontally on the floor or work surface, and on the wall.
Easy way to attach the guide rail with adhesive pads to different surfaces.
Two guide rails can be transported easily and practically on the Systainer carrying handle.
The guide rail FS/2-KP is available in lengths of 1400 and 1900 mm.

Stays firmly in place: guide rail attached with adhesive pads - precise and safe sawing even in difficult positions
Practical to transport - the guide rail is inserted onto the end of the Systainer carrying handle
Tear-free cut - rubber strip directly at the edge of the marking prevents the edge from tearing even when making angled cuts
Sliding coating for easy movement of the machine on the guide rail
Adhesive base coating protects the surface of the workpiece being processed from damage

In any position
With adhesive pads, the guide rail can be attached to the work surface, floor, and wall. This allows for straight cuts in any position.

Adhesive pads for strong attachment
Adhesive pads can be installed quickly and easily into the openings of the guide rail. Align the guide rail, press the adhesive pad against the rail - done.

Residue-free removal
Adhesive pads can be removed easily and without residue, even from sensitive surfaces, and without damaging the pads.

Transport
Thanks to the slots in the guide rails, it is easy to transport, for example, two guide rails over the Systainer carrying handle.

Angle stop for precise cuts
The angle stop can be attached to the guide rail quickly and without additional tools, for precise angled cuts from -60° to +60°.

Precise angle transfer
With the combinable bevel angle and guide rail, angles can be transferred directly and easily to the workpiece without extensive calculation and experimentation.

Precise grooves
For precise and straight grooves, it is recommended to use an overhead router with a stop. Place directly on the guide rail and mill.

Play-free guidance
The guide grooves of the plunge-cut saw can be set on the guide rail without tools. This allows for play-free machine guidance and precise cuts.

Convenient connection
With self-aligning connecting pieces, two guide rails can be quickly and conveniently connected. For long and straight cuts and ideal work results.

Does not snag
The waste guide prevents the suction hose and cord from snagging on the end of the guide rail.