Festool Guide Rail FS 2700/2

Pikkus 2700 mm

Invented and perfected by Festool: guide rails. For cuts and grooves that impress with their precision. With a sliding coating for smooth machine operation and a groove for splinter guards and lever clamps or for sawing without splintering. A breakthrough in precision and simplification of work since 1964. The guide rail is available in 8 different lengths, from 800 to 5000 mm.

Advantages:
Play-free guidance – you can adjust the plunge saw guide jaws without tools so that it fits perfectly on the guide rail. Cut without tear-out – the splinter guard directly on the marking prevents edge tearing even with angled cuts. Precise results – the router guide stop is designed for precise grooves. Quick for diagonal cuts – with the guide rail and combination square, it's very easy to transfer angles measured from the workpiece or wall.

Purpose: Safe and perfectly straight guidance of the machine. Splinter guard for splinter-free sawing. With a gripping cushion strip, it can easily be placed on smooth materials. Protects the workpiece surface from damage. An additional groove for using accessories allows even more applications. Sliding cover for easy machine movement on the guide rail.

For precise cuts without the need for reworking or for precise grooves with a router. Precise and safe in combination with a combination square, sliding cover, kickback stop or splinter guard. Ideal addition to the guide rail: Multifunctional MFT table – versatile in the workshop and practical for installation.

The sliding cover ensures the machine's movement on the guide rail. The kickback stop limits guidance or ensures that plunge saws do not kick back when plunging into the workpiece. With the combinable bevel angle and guide rail, angles can be transferred directly and easily to the workpiece without much calculation and testing. Combined with a jigsaw, precise cuts can be achieved up to 20 mm wood thickness. For precise and straight grooves, it is recommended to use a router with a stop. Place directly on the guide rail and rout. The plunge saw guide slots can be set on the guide rail without tools. This allows the machine to be guided without play and to make precise cuts. The gripping cover keeps the rail firmly in place and at the same time protects the surface. For even greater support, there are clamps, quick clamps FS-Rapid and a lifting handle GECKO with two suction cups. The rubber edge directly at the marking protects the edges from tearing open as a splinter guard - even when making angled cuts. With the connecting piece, two guide rails can be easily connected and aligned. The waste guide prevents the suction hose and cable from getting stuck at the end of the guide rail.

The waste guide prevents the suction hose and cable from getting stuck at the end of the guide rail.