Festool Guide Rail FS 3000/2

Length 3000 mm

For precise and straight grooves, it is recommended to use a router with a stop. Place directly on the guide rail and rout.
The plunge saw guide slots can be set on the guide rail without tools. This allows for play-free machine guidance and precise cuts.
The gripping cover holds the rail firmly in place and at the same time protects the surface.
For even greater support, there are clamps, rapid clamps FS-Rapid and a lifting handle GECKO with two suction cups.
The rubber edge directly at the marking protects as a splinter guard against tearing edges - even when making angled cuts.
With the connecting piece, two guide rails can be easily connected and aligned.
The waste guide prevents the suction hose and cable from getting stuck at the end of the guide rail.
The sliding coating ensures the machine's movement on the guide rail.
The kickback stop limits the guidance or ensures that plunge saws do not experience kickbacks when plunging into the workpiece.
With the combinable bevel angle and guide rail, angles can be transferred directly and easily to the workpiece without much calculation and testing.
When combined with a jigsaw, precise cuts can be achieved with wood thicknesses of up to 20 mm.

Invented and perfected by Festool: guide rails.
For cuts and grooves that impress with their precision.
For smooth operation of the machine with a sliding coating, and for groove screws and lever clamps or splinter-free sawing with a splinter guard.
A breakthrough in precision and simplification of work since 1964.
Guide rails are available in 8 different lengths, from 800 to 5000 mm.
Benefits:
Play-free guidance – you can adjust the plunge saw guide jaws without tools so that it fits perfectly on the guide rail|Splinter-free cut – the splinter guard directly on the marking prevents edge tearing even when cutting at an angle. Precise results – the router guide stop is designed for precise grooves. Quick for diagonal cuts – with the guide rail and combination square, it is very easy to transfer angles measured from the workpiece or wall

Purpose:Safe and perfectly straight guidance of the machine. Splinter guard for splinter-free sawing. With a gripping cushion strip, it can easily be placed on smooth materials. Protects the workpiece surface from damage. An additional groove for using accessories allows for even more applications. Sliding coating for easy movement of the machine on the guide rail

For precise cuts without the need for reworking or for precise grooves with a router.
Precise and safe in combination with a combination square, sliding coating, kickback stop or splinter guard.
The perfect addition to the guide rail: Multifunctional MFT table – versatile in the workshop and practical for installation.