Festool Guide Rail FS 5000/2

Invented and perfected by Festool: guide rails. For cuts and grooves that impress with their precision.
With a sliding coating for smooth machine operation and a groove for chip guard screws and lever clamps or for sawing without tear-out marks.
A breakthrough in precision and simplification of work since 1964.
Guide rails are available in 8 different lengths, from 800 to 5000 mm.

Play-free guidance – you can adjust the plunge saw guide jaws without tools so that it fits perfectly on the guide rail
Cut without tear-out marks – the splinter guard directly on the marking prevents edge tear-out even when making angled cuts
Precise results – the router guide stop is designed for precise grooves
Quick for diagonal cuts – with the guide rail and combination square, it is very easy to transfer angles measured from the workpiece or wall

Work flows smoothly
The sliding coating ensures the machine moves on the guide rail.

Safely limited
The kickback stop limits guidance or ensures that plunge saws do not experience kickbacks when plunging into the workpiece.

Precise angles
With the combinable bevel angle and guide rail, angles can be transferred directly and easily to the workpiece without much calculation and testing.

Straight as a string cuts
When combined with a jigsaw, precise cuts can be achieved up to 20 mm in wood thickness.

Precise grooves
For precise and straight grooves, it is recommended to use a router with a stop. Place it directly on the guide rail and rout.

Play-free guidance
The plunge saw guide jaws can be set on the guide rail without tools. This allows for play-free machine guidance and precise cuts.

Slipping is ruled out
The grip coating holds the rail firmly in place and at the same time protects the surface. For even greater support, there are clamps, quick clamps FS-Rapid and the GECKO lifting handle with two suction cups.

No deviations
The rubber lip directly at the marking protects the edges from tearing open as a splinter guard - even when making angled cuts.

Convenient connection
With the connecting piece, two guide rails can be easily connected and aligned.

Does not get stuck
The waste guide prevents the suction hose and cable from getting stuck at the end of the guide rail.