Festool miter saw KAPEX KS 120 REB-Set-AS
.jpg)
Official Festool Dealer
- 100% genuine products
- Manufacturer warranty and service
- Professional consultation
Same tool in another kit
.jpg)
Festool miter saw KAPEX KS 120 REB
Angle transfer tool
1757.60€2090.18€-16%In stock 1 pcsFestool miter saw KAPEX KS 120 REB-Set-AS
Multifunction stop
1938.00€2238.98€-13%2-4 рабочих дней.jpg)
Festool miter saw KAPEX KS 120 REB-Set-UG
Base frame · Length stops
2747.50€3432.16€-20%2-4 рабочих дней.jpg)
Festool miter saw KAPEX KS 120 REB-Set-MFT
MFT KAPEX table · Length stops · Angle support
2948.10€3622.77€-19%2-4 рабочих дней
More accessories
DELIVERY FROM SEPTEMBER 2026!
Main applications:
Installation of floor and ceiling moldings up to 120 mm high – without calculation
Cutting boards and panels up to 305 x 88 mm in length
Installation work of edge moldings up to 168 mm in the „wall initial position“
Ripping of beams and joists up to 88 mm thick
Guides left, guides right. Even where others only pretend. Together with double ball joints that hold the carriage with double force and extra-large columns precisely on course. The double seal ensures extreme durability, is always precise and without play.
Maximum precision for the perfect cut
The KS 120 impresses with precise cuts thanks to the double-column guide, an impressive cutting capacity of up to 120 mm and a weight of only 21.5 kg.
Extra-strong and with double ball bearing
Festool's double-column guide ensures safe and smooth movement of the saw blade and maximum cutting precision.
Extra class down to the last detail
Double-line laser for precise marking of the saw cut.
Robust and mobile for tough work on the construction site
The casing and high-quality die-cast magnesium provide more rigidity and, at the same time, less weight.
Remarkable cutting performance
With the special cutting position of the KS 120, moldings up to 120 mm high vertically or ceiling and edge moldings in the „wall initial position“ can be sawn.
MMC electronics ensure material-appropriate and safe working
Adjustable speed preselection, soft start, overload protection and also an integrated quick brake.
Short setup times, good results
With FastFix, always perfectly prepared for quick and easy saw blade changes.
Even more convenient
Fine adjustment for setting the miter angle to the millimeter. Like all important controls, they can be easily and quickly adjusted from the front.
Unlimited mobility
With ergonomically placed left- and right-hand recessed grips, cable reel, transport lock and extraction clip. In addition, it is extremely compact and lightweight in design.
Clear view of the workpiece and dust-free surroundings
The dust extraction system and chip collection funnel extract chips at their source.
Saves time, reduces mistakes
Miter gauge for quick measurement of internal and external angles and then easy and precise transfer to the saw.
Stand and transport frame in one
The base frame makes the KAPEX mobile and turns it into a sawing station in three simple steps. Crosscut length of 2.40 m (including rip fence).
For working while standing
The KAPEX fits precisely onto the MFT 3 Kapex perforated board. It is fixed with a clamping kit.
For processing large workpieces too
Individually extendable table extension ensures safe and precise support even for long workpieces
Anti-static function
Mobile dust extractors and machines with anti-static function against the generation of static charge during work.
MMC Electronic Digital
Processor-controlled power electronics „Multi Material Control“ with adjustable, constant speed and temperature monitoring for material-appropriate processing.
Precise double-line laser
Two laser lines for easy and precise positioning to the right or left of the marking.
Dimensions
Sound & Vibration
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Festool website, the warranty is extended to 3 years for both private and business customers.
To extend the warranty, the product must be registered within 100 days at the latest.
In addition to the extended warranty, additional benefits apply upon product registration:
Free comprehensive repair.
Fast, thorough, and completely free for the first three years! Festool also replaces typical wear parts such as carbon brushes, ball bearings, or O-rings.*
*The offer of free repair also applies to batteries and their chargers, but not to other consumables and accessories. It also does not apply if the tool has been disassembled or damaged due to misuse, if parts from other manufacturers have been used, or if it has been worn out due to continuous use in heavy-duty operation.
Replacement in case of theft.
During the first three years, Festool will replace a stolen tool with a brand-new device for a net deductible of only €125 (excluding VAT). This is to ensure you can continue your work as quickly as possible. For products in the PowerStation category, the net deductible is €1000 (excluding VAT).
Original part guarantee.
Festool guarantees the availability of all spare parts for at least ten years. If a spare part is out of stock, you will be given a new, similar tool free of charge.
Read the extended warranty terms and conditions HERE.
A consumer (private customer) has the right, pursuant to Estonian Law of Obligations Act §218(2), to submit a warranty claim to the seller within 2 years.
Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
DELIVERY FROM SEPTEMBER 2026!
Main applications:
Installation of floor and ceiling moldings up to 120 mm high – without calculation
Cutting boards and panels up to 305 x 88 mm in length
Installation work of edge moldings up to 168 mm in the „wall initial position“
Ripping of beams and joists up to 88 mm thick
Guides left, guides right. Even where others only pretend. Together with double ball joints that hold the carriage with double force and extra-large columns precisely on course. The double seal ensures extreme durability, is always precise and without play.
Maximum precision for the perfect cut
The KS 120 impresses with precise cuts thanks to the double-column guide, an impressive cutting capacity of up to 120 mm and a weight of only 21.5 kg.
Extra-strong and with double ball bearing
Festool's double-column guide ensures safe and smooth movement of the saw blade and maximum cutting precision.
Extra class down to the last detail
Double-line laser for precise marking of the saw cut.
Robust and mobile for tough work on the construction site
The casing and high-quality die-cast magnesium provide more rigidity and, at the same time, less weight.
Remarkable cutting performance
With the special cutting position of the KS 120, moldings up to 120 mm high vertically or ceiling and edge moldings in the „wall initial position“ can be sawn.
MMC electronics ensure material-appropriate and safe working
Adjustable speed preselection, soft start, overload protection and also an integrated quick brake.
Short setup times, good results
With FastFix, always perfectly prepared for quick and easy saw blade changes.
Even more convenient
Fine adjustment for setting the miter angle to the millimeter. Like all important controls, they can be easily and quickly adjusted from the front.
Unlimited mobility
With ergonomically placed left- and right-hand recessed grips, cable reel, transport lock and extraction clip. In addition, it is extremely compact and lightweight in design.
Clear view of the workpiece and dust-free surroundings
The dust extraction system and chip collection funnel extract chips at their source.
Saves time, reduces mistakes
Miter gauge for quick measurement of internal and external angles and then easy and precise transfer to the saw.
Stand and transport frame in one
The base frame makes the KAPEX mobile and turns it into a sawing station in three simple steps. Crosscut length of 2.40 m (including rip fence).
For working while standing
The KAPEX fits precisely onto the MFT 3 Kapex perforated board. It is fixed with a clamping kit.
For processing large workpieces too
Individually extendable table extension ensures safe and precise support even for long workpieces
Anti-static function
Mobile dust extractors and machines with anti-static function against the generation of static charge during work.
MMC Electronic Digital
Processor-controlled power electronics „Multi Material Control“ with adjustable, constant speed and temperature monitoring for material-appropriate processing.
Precise double-line laser
Two laser lines for easy and precise positioning to the right or left of the marking.
Technical Specifications
Dimensions
Sound & Vibration
What's in the box
Shipping & Delivery
Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
Private customer: 2 years
Business customer: 1 year
If the product is registered on the Festool website, the warranty is extended to 3 years for both private and business customers.
To extend the warranty, the product must be registered within 100 days at the latest.
In addition to the extended warranty, additional benefits apply upon product registration:
Free comprehensive repair.
Fast, thorough, and completely free for the first three years! Festool also replaces typical wear parts such as carbon brushes, ball bearings, or O-rings.*
*The offer of free repair also applies to batteries and their chargers, but not to other consumables and accessories. It also does not apply if the tool has been disassembled or damaged due to misuse, if parts from other manufacturers have been used, or if it has been worn out due to continuous use in heavy-duty operation.
Replacement in case of theft.
During the first three years, Festool will replace a stolen tool with a brand-new device for a net deductible of only €125 (excluding VAT). This is to ensure you can continue your work as quickly as possible. For products in the PowerStation category, the net deductible is €1000 (excluding VAT).
Original part guarantee.
Festool guarantees the availability of all spare parts for at least ten years. If a spare part is out of stock, you will be given a new, similar tool free of charge.
Read the extended warranty terms and conditions HERE.
A consumer (private customer) has the right, pursuant to Estonian Law of Obligations Act §218(2), to submit a warranty claim to the seller within 2 years.
Reviews
This product has no reviews yet. Be the first to rate it.
Festool miter saw KAPEX KS 120 REB-Set-AS
579357