Festool table saw TKS 80 EBS

Main applications:
Making crosscuts with a sliding table up to 820 mm wide with a cutting depth of 20 mm
Longitudinal cuts with a cutting height of up to 80 mm and an extension of 600 mm
-2° to +47° angle cuts thanks to the rotating saw blade

Every year, about 4,000 people injure themselves while working with a circular saw, which means 16 injured per working day. About 26% of serious accidents even cause incapacity for work (DGUV statistics "Work accidents 2017"). With the new universal circular saw TKS 80, the risk of serious cutting injuries is lower. You focus on working, we protect your most valuable tool – your fingers.

Improved safety: Lower risk for your fingers - Built-in SawStop-AIM technology's sensitive sensors ensure safe sawing of non-conductive materials. If necessary, SawStop-AIM technology can also be switched off.
Flexible: 80 mm cutting height, extendable work surface and longitudinal and angle stops allow flexible work ‒ even with larger materials
Tear-free cuts: Fewer tear marks on the top of the material, thanks to the left rotation of the saw blade
Protect your health: dust extraction cover with CLEANTEC suction sleeve for dust-free work and free visibility to the material to be processed
Space-saving: the tool holder mounted on the side offers optimal storage space for saw blades, cassettes and push sticks

Integrated SawStop-AIM technology
The risk of serious cutting injuries is lower.

Sensitive detection system
In case of contact with human skin, the saw blade stops within 5 milliseconds and disappears under the work surface.

Smart cassette
The cassette releases a pre-tensioned spring and closes the aluminum block into the saw blade. After releasing the pre-tensioned spring, the cassette can be replaced again with a few simple movements.

Flexible cutting height
For large cross-sections up to 80 mm.

Ultimate precision
Thanks to the left tilt of the saw blade, there is less damage to the surface of the material in the case of longitudinal cuts on the inclined edge. More space and a clear view of the material to be processed.

Wide range of system accessories
Extendable and extendable work surface. Sliding table for making crosscuts up to 820 mm.

Bypass option
SawStop-AIM technology can be switched off if desired. In this case, electrically conductive materials can also be sawn.

Cuts made at a precise angle
For making crosscuts and longitudinal cuts with fixing points and a fine regulator.

Healthier systemic work
The dust cover with the CLEANTEC dust extraction sleeve ensures dust-free work and a free view of the workpiece.

MMC electronic multi-material control
Working suitable for the material: Power electronics "Multi Material Control" with adjustable, constant rotational speed and temperature monitoring.

Quick brake
For safe working when planing, sawing and milling.