Kärcher robot vacuum cleaner RCV 3

More time in life for pleasant things: the smart RCV 3 cleaning robot takes over floor cleaning. After starting, the RCV 3 robot systematically and independently cleans your floors and low-pile carpets.
Dry dirt is reliably transported to the built-in waste container by a rotating brush, side edge brush and fan.
If necessary, the RCV 3 not only vacuums, but can also do wet cleaning.
When the battery capacity decreases, the RCV 3 can regularly charge itself and always returns to the charging station after work.
Via the application, the RCV 3 is sent on a research trip and automatically creates a map of the rooms, detecting the surroundings (LiDAR). Individual cleaning parameters can be set for each room. For example, which rooms should be vacuumed, mopped or left uncleaned.
Additional sensors prevent the device from falling, for example, down the stairs.
The RCV 3 can be conveniently started via the app for cleaning work, using a pre-set individual schedule or by pressing the device button.
If the cleaning robot needs help, it will announce it in many situations via voice output.

Wet cleaning
For better cleaning, the RCV 3 does wet cleaning.
If necessary, use the RCV 3 cleaning robot can be used only for vacuuming, only for wet mopping or in a combined cleaning mode with both options.

Precise navigation
LiDAR sensors on the RCV 3 allow you to be very precise when recording rooms and create detailed mapping for safe cleaning.
With fast and powerful LiDAR navigation, the RCV 3 scans your rooms and thus has the best maps to safely and reliably navigate the rooms even in the dark.

Fall sensors
Fall sensors prevent the RCV 3 from falling.
The sensors scan the floor. If a large fall is detected, the controller receives a signal that triggers the robot to turn around.

Data protection and updates
As a manufacturer based in Germany, Kärcher attaches great importance to data protection and ensures that all applicable legal requirements are met.
All data transmission between your smartphone's Home Robots application and the robot vacuum cleaner and mop runs via the cloud only to servers located in Germany.
Regular updates improve and expand the performance of the robot vacuum cleaner and the application. This also means that the security of the system is constantly updated to meet current specifications.

Voice output
Always well informed: The RCV 3 uses voice output to convey important information and share the current status.
If the RCV 3 robot vacuum cleaner needs help or service, it will let you know in many situations via voice output.

Conveniently controlled via the application and WiFi
The application can be used to adjust many settings according to individual preferences.
With the help of the application, you can configure the RCV 3 cleaning robot and control it from any location. Even if you are not at home.
Information about the current status of the device and a screen showing the current cleaning progress are available via the application.

Precise mapping with versatile customization options
The application can save multiple maps, e.g. for multiple floors.
It is possible to define zones where you do not want the robot to go and clean (e.g. cat scratching posts, children's play areas or obstacles that the robot cannot pass).
Definition of selected areas that need to be cleaned several times, cleaned in intensive cleaning mode or wiped with more water.

Adjustment of cleaning parameters
Definition of different cleaning parameters in the application for individual areas of the rooms (e.g. suction power or water volume, number of cleanings per surface).

Timer program
Via the application, you can plan cleaning times and create cleaning plans.
The RCV 3 independently starts cleaning trips according to the planned dates/times.