KNIPEX circlip pliers for internal circlips in bores 12–25 mm, angled at 45°
.jpg)
Official Knipex Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Length: 140 mm
Width: 47 mm
Height: 12 mm
Weight: 90 g
Surface: black phosphate-finished
Handles: with plastic coating
Head: polished
Bore diameter: 12–25 mm
Angle: jaws bent at a 45° angle
Tip diameter: 1,3 mm
Design: based on DIN 5256 C, but with jaws bent at 45°
Head: polished
Design: strong, forged
Tips: non-slip, strong
Rugged construction and forged.
- Non-slip, strong tips.
Grip securely, remove and install hard-to-reach internal retaining rings
Precise and stable forged tips ensure a perfect grip
Installing and removing retaining rings requires very precise plier tips, as there is little room for movement in the retaining ring mounting holes. The plier tips must withstand the ring's high tension and hold the retaining ring securely after removal or before installation. Knipex 44 31 J12 is manufactured to the required precision. The handles and tips are forged from a single piece, ensuring high durability. The precisely shaped tips are machined so that they curve slightly inwards. This keeps retaining rings securely on the plier tips.
Reinforced construction transfers hand force precisely to the mounting holes
Working precisely with retaining rings requires an efficient reinforced construction and precise transfer of hand force to the retaining ring. The retaining ring is under tension during installation and removal. This tension must be overcome without excessively stretching the ring. Thanks to high-quality workmanship, balanced tool geometry and a precise joint, Knipex 44 31 J12 transfers hand force to the retaining ring in a way that enables optimal work: precise and easy on the hands.
Good access even in confined spaces: plier tips angled at 45° at the front
The Knipex 44 31 J12 pliers are very narrow at the front and have tips angled at 45°, ensuring good access even to hard-to-reach retaining rings. These reliable retaining ring pliers make work considerably easier. They fit comfortably in the hand, can be positioned precisely in the retaining ring holes and hold rings securely. Working with high-quality retaining ring pliers, such as the Knipex 44 31 J12, saves a lot of time, as anyone who has tried to remove a retaining ring from a drilled hole using makeshift tools knows. If successful at all, it takes time. It can also take a long time to find a retaining ring in the workshop if it has sprung loose because poorly machined retaining ring plier tips could not hold it securely. With the Knipex 44 31 J12, every retaining ring and every hand movement stays securely in place.
- Slim retaining ring pliers for internal retaining rings in drilled holes; plier tips angled at 45° at the front.
- For easy and professional installation and removal of retaining rings fitted in drilled holes with a diameter of 12–25 mm.
- Durable: handles and tips are forged from chrome-vanadium steel and oil-hardened and tempered.
- Non-slip, angled and stable tips with a diameter of 1,3 mm.
- Black phosphate-finished pliers; precision-machined head.
- Handles coated with non-slip plastic.
- Length: 140 mm
- Net weight: 90 g
Knipex retaining ring pliers – every hand movement is secure
Knipex offers a wide range of retaining ring pliers suitable for use in everything from precision mechanics to marine engine manufacturing. Those who use tools extensively and professionally every day expect quality that enables easy and safe work and withstands many years of intensive use.
We forge our tools from high-quality materials, machine them with extreme precision on modern machines and harden them using careful heat treatment.
Every pair of Knipex pliers reflects more than 130 years of specialist experience.
Length: 140 mm
Width: 47 mm
Height: 12 mm
Weight: 90 g
Surface: black phosphate-finished
Handles: with plastic coating
Head: polished
Bore diameter: 12–25 mm
Angle: jaws bent at a 45° angle
Tip diameter: 1,3 mm
Design: based on DIN 5256 C, but with jaws bent at 45°
Head: polished
Design: strong, forged
Tips: non-slip, strong
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
Rugged construction and forged.
- Non-slip, strong tips.
Grip securely, remove and install hard-to-reach internal retaining rings
Precise and stable forged tips ensure a perfect grip
Installing and removing retaining rings requires very precise plier tips, as there is little room for movement in the retaining ring mounting holes. The plier tips must withstand the ring's high tension and hold the retaining ring securely after removal or before installation. Knipex 44 31 J12 is manufactured to the required precision. The handles and tips are forged from a single piece, ensuring high durability. The precisely shaped tips are machined so that they curve slightly inwards. This keeps retaining rings securely on the plier tips.
Reinforced construction transfers hand force precisely to the mounting holes
Working precisely with retaining rings requires an efficient reinforced construction and precise transfer of hand force to the retaining ring. The retaining ring is under tension during installation and removal. This tension must be overcome without excessively stretching the ring. Thanks to high-quality workmanship, balanced tool geometry and a precise joint, Knipex 44 31 J12 transfers hand force to the retaining ring in a way that enables optimal work: precise and easy on the hands.
Good access even in confined spaces: plier tips angled at 45° at the front
The Knipex 44 31 J12 pliers are very narrow at the front and have tips angled at 45°, ensuring good access even to hard-to-reach retaining rings. These reliable retaining ring pliers make work considerably easier. They fit comfortably in the hand, can be positioned precisely in the retaining ring holes and hold rings securely. Working with high-quality retaining ring pliers, such as the Knipex 44 31 J12, saves a lot of time, as anyone who has tried to remove a retaining ring from a drilled hole using makeshift tools knows. If successful at all, it takes time. It can also take a long time to find a retaining ring in the workshop if it has sprung loose because poorly machined retaining ring plier tips could not hold it securely. With the Knipex 44 31 J12, every retaining ring and every hand movement stays securely in place.
- Slim retaining ring pliers for internal retaining rings in drilled holes; plier tips angled at 45° at the front.
- For easy and professional installation and removal of retaining rings fitted in drilled holes with a diameter of 12–25 mm.
- Durable: handles and tips are forged from chrome-vanadium steel and oil-hardened and tempered.
- Non-slip, angled and stable tips with a diameter of 1,3 mm.
- Black phosphate-finished pliers; precision-machined head.
- Handles coated with non-slip plastic.
- Length: 140 mm
- Net weight: 90 g
Knipex retaining ring pliers – every hand movement is secure
Knipex offers a wide range of retaining ring pliers suitable for use in everything from precision mechanics to marine engine manufacturing. Those who use tools extensively and professionally every day expect quality that enables easy and safe work and withstands many years of intensive use.
We forge our tools from high-quality materials, machine them with extreme precision on modern machines and harden them using careful heat treatment.
Every pair of Knipex pliers reflects more than 130 years of specialist experience.
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.
.jpg)
KNIPEX circlip pliers for internal circlips in bores 12–25 mm, angled at 45°
4431J12