KNIPEX circlip pliers for internal circlips in bores 130 mm, 8–13 mm, 90° angled
.jpg)
Official Knipex Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Length: 130 mm
Width: 53 mm
Height: 12 mm
Weight: 88 g
Surface finish: black oxide
Handles: plastic-coated
Head: polished
Bore diameter: 8–13 mm
Jaw angle: 90°
Tip diameter: 0,9 mm
Design: DIN 5256 D, jaws angled at 90°
Durable construction, forged.
- Non-slip, sturdy tips.
- For installing internal retaining rings in bores with a diameter of 8–13 mm.
Secure gripping, removal and installation of internal retaining rings
Precise and stable forged tips
The tips of circlip pliers are crucial when working with retaining rings. They engage with the installation holes in the retaining rings, whose surface provides very little friction for the plier tips. The tips must be able to withstand the ring’s high tension and hold the retaining ring securely after removal or before installation. The tips of Knipex 44 21 J01 pliers meet high standards for precision and stability. The handles and tips are forged from a single piece, ensuring the tool is highly durable. The tips are also machined with great precision, twisted and angled slightly inward so that retaining rings do not slip off them.
Reinforced force is transferred precisely to the installation holes
The usefulness of pliers is affected by several factors, one of which is the amount of force applied to the workpiece. Above all, it is important that the force applied by hand is transferred to the workpiece precisely and with the appropriate strength. This is especially true of circlip pliers, since retaining rings flex during installation and removal. Thanks to high-quality workmanship, balanced geometry and a precise joint, the force applied by hand with Knipex 44 21 J01 pliers is transferred to the retaining ring in a way that allows you to work at your best: precisely and with less strain on your hands.
Reaching, gripping precisely and holding retaining rings securely
High-quality circlip pliers, such as Knipex 44 21 J01, make work noticeably easier. They have very fine working tips. The pliers fit comfortably in the hand, their tips can be positioned precisely in the retaining ring’s installation holes, and the rings can be held securely. Working with first-class circlip pliers saves a lot of time, as anyone who has tried to remove a retaining ring from a bore with improvised tools knows. If poorly machined plier tips fail to hold the ring properly and it flies off under spring tension, it can take a long time to find it in the workshop. With Knipex 44 21 J01 pliers, every retaining ring and every hand movement stays under control.
- Internal circlip pliers for bores; the plier tips are angled at 90° at the front.
- For easy, professional installation and removal of internal retaining rings from bores with a diameter of 8–13 mm.
- Durable: the handles and tips are made of chrome vanadium steel, oil-hardened and tempered.
- Non-slip, angled and sturdy tips with a diameter of 0,9 mm.
- The pliers are black and phosphated; the head is precision-machined.
- The handles are coated with non-slip plastic.
- Length: 130 mm
- Net weight: 88 g
Knipex circlip pliers – every hand movement is precise
Knipex offers a wide range of circlip pliers suitable for applications ranging from precision engineering to marine engine manufacturing. People who use tools extensively and professionally every day expect quality that allows them to work easily and safely and withstands many years of intensive use.
We forge our tools from high-quality materials, machine them with the utmost precision using modern equipment, and harden them through carefully controlled heat treatment. Every pair of Knipex pliers embodies 130 years of professional experience.
Every pair of Knipex pliers embodies more than 130 years of professional experience.
Length: 130 mm
Width: 53 mm
Height: 12 mm
Weight: 88 g
Surface finish: black oxide
Handles: plastic-coated
Head: polished
Bore diameter: 8–13 mm
Jaw angle: 90°
Tip diameter: 0,9 mm
Design: DIN 5256 D, jaws angled at 90°
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
Durable construction, forged.
- Non-slip, sturdy tips.
- For installing internal retaining rings in bores with a diameter of 8–13 mm.
Secure gripping, removal and installation of internal retaining rings
Precise and stable forged tips
The tips of circlip pliers are crucial when working with retaining rings. They engage with the installation holes in the retaining rings, whose surface provides very little friction for the plier tips. The tips must be able to withstand the ring’s high tension and hold the retaining ring securely after removal or before installation. The tips of Knipex 44 21 J01 pliers meet high standards for precision and stability. The handles and tips are forged from a single piece, ensuring the tool is highly durable. The tips are also machined with great precision, twisted and angled slightly inward so that retaining rings do not slip off them.
Reinforced force is transferred precisely to the installation holes
The usefulness of pliers is affected by several factors, one of which is the amount of force applied to the workpiece. Above all, it is important that the force applied by hand is transferred to the workpiece precisely and with the appropriate strength. This is especially true of circlip pliers, since retaining rings flex during installation and removal. Thanks to high-quality workmanship, balanced geometry and a precise joint, the force applied by hand with Knipex 44 21 J01 pliers is transferred to the retaining ring in a way that allows you to work at your best: precisely and with less strain on your hands.
Reaching, gripping precisely and holding retaining rings securely
High-quality circlip pliers, such as Knipex 44 21 J01, make work noticeably easier. They have very fine working tips. The pliers fit comfortably in the hand, their tips can be positioned precisely in the retaining ring’s installation holes, and the rings can be held securely. Working with first-class circlip pliers saves a lot of time, as anyone who has tried to remove a retaining ring from a bore with improvised tools knows. If poorly machined plier tips fail to hold the ring properly and it flies off under spring tension, it can take a long time to find it in the workshop. With Knipex 44 21 J01 pliers, every retaining ring and every hand movement stays under control.
- Internal circlip pliers for bores; the plier tips are angled at 90° at the front.
- For easy, professional installation and removal of internal retaining rings from bores with a diameter of 8–13 mm.
- Durable: the handles and tips are made of chrome vanadium steel, oil-hardened and tempered.
- Non-slip, angled and sturdy tips with a diameter of 0,9 mm.
- The pliers are black and phosphated; the head is precision-machined.
- The handles are coated with non-slip plastic.
- Length: 130 mm
- Net weight: 88 g
Knipex circlip pliers – every hand movement is precise
Knipex offers a wide range of circlip pliers suitable for applications ranging from precision engineering to marine engine manufacturing. People who use tools extensively and professionally every day expect quality that allows them to work easily and safely and withstands many years of intensive use.
We forge our tools from high-quality materials, machine them with the utmost precision using modern equipment, and harden them through carefully controlled heat treatment. Every pair of Knipex pliers embodies 130 years of professional experience.
Every pair of Knipex pliers embodies more than 130 years of professional experience.
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.
.jpg)
KNIPEX circlip pliers for internal circlips in bores 130 mm, 8–13 mm, 90° angled
4421J01