Milwaukee cordless pipe groover M18 FRGRO114-0C, without battery and charger

Voltage: 18 V
Weight: 18.7 kg
Weight with battery (EPTA): 19.8 kg (M18 FB8)
Handles: 1
Orbit diameter: ≥127 mm
Pipe diameter (DN): 32 – 100
Pipe diameter (inches): 1¼ – 4
Product dimensions (L x W x H): 483 x 216 x 260 mm
Pipe diameter: 42.4 – 114.3 mm
Pipe max diameter: 114.3 mm
Pipe wall thickness: 2.6 – 5.6 mm
Range on the pipe (max Ø): 114.3 mm

Sound pressure level (LpA): 77.66 dB(A)
Sound pressure level uncertainty: 3 dB(A)
Sound power level (LwA): 89.23 dB(A)
Sound power level uncertainty: 3 dB(A)

Without battery and charger.

Delivery set:
Plastic case

Cordless pipe groover, which takes on-site groove cutting efficiency to a new level
Easy-to-use controls make groove cutting effortless
Before cutting, simply select the pipe size, material and wall thickness and set the groove depth to match the pipe size
You can cut pipes with different wall thicknesses in sizes from 1 ¼″ (DN32) to 4″ (DN100)
With the M18™ 8.0 Ah battery, you can cut up to 50 grooves into a 2.5″ pipe on a single charge
Use without holding: the tool rotates around the pipe itself to cut the groove
The device has three stop buttons to increase safety
Allows cutting of both installed and pipe-mounted pipes
Pipes of the same size can be cut in a row without correcting the initial depth setting
This eliminates the need to repeat measurements after each groove is cut and reduces guesswork during work
The foldable handle makes it easy to carry the tool on the work site
Efficient mechanism allows grooves to be cut in both horizontal and vertical positions
Flexible battery system: works with all MILWAUKEE® M18™ batteries