Milwaukee pressing pliers M18 HCCT-201C
Official Milwaukee Dealer
- 100% genuine products
- Manufacturer warranty and service
- Professional consultation
Batteries and chargers for this product
Pressing speed: < 3>Pressing range: 16 - 300 mm²
Pressing cycle with charging: > 250 using 70 mm² copper connector
Pressing force: 53 kN
Pressing cycle: 30,000
FORCE LOGIC™ hydraulic pressing pliers press connectors in less than 3 seconds with a force of 53 kN
Milwaukee® designed and assembled brushless POWERSTATE™ motor has up to 4x longer life
The best balanced tool and the easiest control thanks to one-handed use
Compact straight and slim grip design and 350° rotatable head allow easy pressing even in tight spaces
The new grip holds the connector, ensuring the best alignment of the cable and connector
PFM™ (Predictive Force Monitoring): automatically adjusts the power depending on the connector, ensuring optimal pressure every time, and visualizes with a green light
Allows pressing up to 300 mm² copper and 150 mm² aluminum connectors
Universal die attachment suitable for most common 60 kN U-dies (C-shaped dies) available on the market
The tool registers and saves each pressing ONE-KEY™ readiness for professional reports via the ONE-KEY™ adapter or ONE-KEY™ application
FORCE LOGIC™ ensures long-term reliability: requires calibration check only after 30,000 cycles, which is an industry-leading indicator; the tool continues to work even after reaching 30,000 cycles
The electronics are protected against dirt, dust and moisture in a harsh environment
Battery and tool communication: to avoid incomplete pressing, pressing is not started if the battery charge is insufficient
The REDLINK™ individual battery cell monitoring system optimizes the tool's operating time and ensures long battery life
The REDLITHIUM-ION™ battery has a better design and electronics and enables consistent performance and more operating time throughout its life
Dimensions
1 x 2.0 Ah battery
Charger
Plastic case
.jpg?v=231179-v2)
.jpg?v=231347-v2)
.jpg?v=231348-v2)
.jpg?v=231349-v2)
.jpg?v=231350-v2)
.jpg?v=231351-v2)
.jpg?v=231311-v2)
.jpg?v=237034-v2)
.jpg?v=237035-v2)
.jpg?v=237036-v2)
.jpg?v=237037-v2)
.jpg?v=237618-v2)
.jpg?v=237619-v2)
.jpg?v=237620-v2)
.jpg?v=237621-v2)
.jpg?v=237622-v2)
.jpg?v=237623-v2)
.jpg?v=237647-v2)
.jpg?v=237648-v2)
.jpg?v=237650-v2)
.jpg?v=237651-v2)
.jpg?v=237652-v2)
.jpg?v=237653-v2)
.jpg?v=237654-v2)
.jpg?v=237655-v2)
.jpg?v=237657-v2)
.jpg?v=237658-v2)
.jpg?v=237659-v2)
.jpg?v=237660-v2)
.jpg?v=237661-v2)
.jpg?v=237662-v2)
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
If the product is registered on the Milwaukee website, the warranty for the device is extended to 3 years for both private and business customers.
The warranty for batteries can be extended to 2 years.
Warranty for chargers is 1 year.
Registration is only possible within 4 weeks of purchase.
If the product is not registered
A consumer (private customer) has the right, pursuant to Estonian Law of Obligations Act §218(2), to submit a warranty claim to the seller within 2 years.
Business customer: 1 year
Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
Pressing speed: < 3>Pressing range: 16 - 300 mm²
Pressing cycle with charging: > 250 using 70 mm² copper connector
Pressing force: 53 kN
Pressing cycle: 30,000
FORCE LOGIC™ hydraulic pressing pliers press connectors in less than 3 seconds with a force of 53 kN
Milwaukee® designed and assembled brushless POWERSTATE™ motor has up to 4x longer life
The best balanced tool and the easiest control thanks to one-handed use
Compact straight and slim grip design and 350° rotatable head allow easy pressing even in tight spaces
The new grip holds the connector, ensuring the best alignment of the cable and connector
PFM™ (Predictive Force Monitoring): automatically adjusts the power depending on the connector, ensuring optimal pressure every time, and visualizes with a green light
Allows pressing up to 300 mm² copper and 150 mm² aluminum connectors
Universal die attachment suitable for most common 60 kN U-dies (C-shaped dies) available on the market
The tool registers and saves each pressing ONE-KEY™ readiness for professional reports via the ONE-KEY™ adapter or ONE-KEY™ application
FORCE LOGIC™ ensures long-term reliability: requires calibration check only after 30,000 cycles, which is an industry-leading indicator; the tool continues to work even after reaching 30,000 cycles
The electronics are protected against dirt, dust and moisture in a harsh environment
Battery and tool communication: to avoid incomplete pressing, pressing is not started if the battery charge is insufficient
The REDLINK™ individual battery cell monitoring system optimizes the tool's operating time and ensures long battery life
The REDLITHIUM-ION™ battery has a better design and electronics and enables consistent performance and more operating time throughout its life
Technical Specifications
Dimensions
What's in the box
1 x 2.0 Ah battery
Charger
Plastic case
Shipping & Delivery
Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
If the product is registered on the Milwaukee website, the warranty for the device is extended to 3 years for both private and business customers.
The warranty for batteries can be extended to 2 years.
Warranty for chargers is 1 year.
Registration is only possible within 4 weeks of purchase.
If the product is not registered
A consumer (private customer) has the right, pursuant to Estonian Law of Obligations Act §218(2), to submit a warranty claim to the seller within 2 years.
Business customer: 1 year
Reviews
This product has no reviews yet. Be the first to rate it.
Milwaukee pressing pliers M18 HCCT-201C
4933451194