Motip copper grease COPPER SPRAY 500 ml

APPLICATION:
In addition to many specific and industrial applications, this means that every bolt and nut treated with copper grease that you screw together will also come loose with the same force even after years.
Widely used on wheel bolts to prevent them from rusting. Also when connecting silencers. When used on battery terminals, it ensures an excellent connection and prevents the formation of electrolytic corrosion, on brake parts it prevents them from jamming, burning, squeaking. Not suitable for use with ABS and ASR brake systems.

USAGE:
Before use, store the product at room temperature and shake.
Recommended operating temperature +5° to +30°C
The surfaces to be coated must be clean and dry.
Spray a thin layer on the surface to be protected.
The correct layer of grease is formed only after the solvent has evaporated (approx. 1min)
Nuts and screws must be greased before screwing together.

High copper content, heat-resistant, well-conductive assembly aerosol.
After the evaporation of organic solvents (within a few minutes after spraying), it leaves a dense layer on the surface, which protects against corrosion and is resistant to water, acids and salts, and withstands temperature fluctuations from -40`C to +1100`C.

Base materials: EP grease and small copper particles
Color: copper
Smell: characteristic
Dry matter content: ca 31%
Consumption: 1.26g/sec
Density at 20°C: 0.767g/ml
Temperature resistance -40C to +1100C