YATO 12 V Battery Tester, CCA 200–1200 A

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Application: Checking battery charge and wear levels, assessing the starting system
Operating temperature range: 0–40 ˚C
Storage temperature: -10 to +50 ˚C
Weight: 0,1 kg
Display type: LED
Operating voltage: 12 V DC
Voltage range: 7–15 V DC
Load test current: 100 A
CCA range: 200–1200 A
Battery types tested: Lead-acid, VRLA, AGM
The YATO 12 V battery tester with a CCA measurement range of 200–1200 A lets you check the batteries of passenger cars, commercial vehicles and motorcycles, and assess the vehicle's starting system.
In addition to assessing the battery's condition, the tester displays the battery's wear level as a percentage and its charge level as a percentage of the rated capacity.
Compatible battery types
The tester can check conventional flooded lead-acid batteries, VRLA batteries and AGM batteries.
VRLA (Valve Regulated Lead Acid) is a valve-regulated lead-acid battery, also known as a gel battery.
In an AGM (Absorbed Glass Mat) battery, the electrolyte is contained in highly porous fibreglass mats located between the plates.
CCA measurement
The CCA measurement range depends on the selected standard: SAE 40–1200 CCA, EN 40–1150 CCA, DIN 25–675 CCA and IEC 30–775 CCA.
The battery can be tested while installed in the vehicle or after being removed.
Display and power supply
The display is easy to read and its brightness can be adjusted.
The tester is powered directly by the vehicle's electrical system, so no separate power source is needed.
Battery condition messages
GOOD PASS – the battery is in good condition and does not need charging.
GOOD RECHARGE – the battery is in good condition, but needs to be charged.
RECHARGE RETEST – the battery is discharged and cannot be tested until it has been fully charged.
BAD REPLACE – the battery cannot withstand the load and should be replaced with a new one.
TEST ERROR – the battery's CCA is over 1200 or the tester is not connected to the battery correctly.
Application: Checking battery charge and wear levels, assessing the starting system
Operating temperature range: 0–40 ˚C
Storage temperature: -10 to +50 ˚C
Weight: 0,1 kg
Display type: LED
Operating voltage: 12 V DC
Voltage range: 7–15 V DC
Load test current: 100 A
CCA range: 200–1200 A
Battery types tested: Lead-acid, VRLA, AGM
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
The YATO 12 V battery tester with a CCA measurement range of 200–1200 A lets you check the batteries of passenger cars, commercial vehicles and motorcycles, and assess the vehicle's starting system.
In addition to assessing the battery's condition, the tester displays the battery's wear level as a percentage and its charge level as a percentage of the rated capacity.
Compatible battery types
The tester can check conventional flooded lead-acid batteries, VRLA batteries and AGM batteries.
VRLA (Valve Regulated Lead Acid) is a valve-regulated lead-acid battery, also known as a gel battery.
In an AGM (Absorbed Glass Mat) battery, the electrolyte is contained in highly porous fibreglass mats located between the plates.
CCA measurement
The CCA measurement range depends on the selected standard: SAE 40–1200 CCA, EN 40–1150 CCA, DIN 25–675 CCA and IEC 30–775 CCA.
The battery can be tested while installed in the vehicle or after being removed.
Display and power supply
The display is easy to read and its brightness can be adjusted.
The tester is powered directly by the vehicle's electrical system, so no separate power source is needed.
Battery condition messages
GOOD PASS – the battery is in good condition and does not need charging.
GOOD RECHARGE – the battery is in good condition, but needs to be charged.
RECHARGE RETEST – the battery is discharged and cannot be tested until it has been fully charged.
BAD REPLACE – the battery cannot withstand the load and should be replaced with a new one.
TEST ERROR – the battery's CCA is over 1200 or the tester is not connected to the battery correctly.
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO 12 V Battery Tester, CCA 200–1200 A
YT-83113