YATO diamond cutting disc for ceramics 125 x 22.2 mm

Material: steel 65Mn
Application: ceramic tiles | glaze | stone tiles | glass | porcelain | ceramics | stoneware | roof tiles
Type of work: dry | wet
Max. speed: 12000 min⁻⊃1;
Diameter: 125 mm
Max. linear speed of the disc: 80 m/s
Cutting segment thickness: 1.6 mm
Cutting segment height: 10 mm
Chemical composition of the cutting segment: Fe 20% | Cu 55% | Sn 7% | Ni 8% | Every 10% | diamond coating 15%
Mounting hole diameter: 22.2 mm

Designed for precise and clean dry cutting.
High 10 mm segment extends the life of the disc.
Reduced cross-section allows for faster and more precise cutting without chipping the cutting edges and with less load on the angle grinder.
Segment with optimally selected cobalt hardness and A-class industrial diamond granules.
Precise grinding of the edges of the tiles at a 45° angle (also when working by hand).
The centered disc flange ensures the absence of lateral runout and cutting without edge steps.
Phasing of porcelain stoneware tiles.
Cutting the concave edges of the tiles at an angle.