YATO diamond milling bit 9–38 mm, M14
Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Material: Carbon steel
Use: Preparation and adjustment of installation holes, chamfering, milling, adjustment of hole diameter, edge finishing
Surface finish: Painted
Working section material: Diamond grit
Length: 45 mm
Diameter: 9–38 mm
Thread size: M14
Grit: #46
Applications (continued): Ceramic tiles, gres porcelain tiles, sintered quartz, natural stone, hard building materials
YATO diamond milling bit 9–38 mm, M14 is designed for enlarging, calibrating and chamfering holes in hard building materials.
The funnel-shaped, expanding working section allows the hole diameter to be gradually increased, the edges to be smoothed, and the hole to be precisely adjusted to fit an installation component.
The large working surface of the painted carbon steel body is covered with wear-resistant diamond grit, allowing hard materials to be processed.
The M14 fitting is suitable for direct attachment to an angle grinder with an M14 thread.
The milling bit is suitable for working on ceramic tiles, gres porcelain tiles, sintered quartz, natural stone and other hard building and finishing materials.
It can be used to prepare and adjust holes for pipes, conduits, taps, drains and other components installed in ceramic or stone cladding.
Material: Carbon steel
Use: Preparation and adjustment of installation holes, chamfering, milling, adjustment of hole diameter, edge finishing
Surface finish: Painted
Working section material: Diamond grit
Length: 45 mm
Diameter: 9–38 mm
Thread size: M14
Grit: #46
Applications (continued): Ceramic tiles, gres porcelain tiles, sintered quartz, natural stone, hard building materials
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
YATO diamond milling bit 9–38 mm, M14 is designed for enlarging, calibrating and chamfering holes in hard building materials.
The funnel-shaped, expanding working section allows the hole diameter to be gradually increased, the edges to be smoothed, and the hole to be precisely adjusted to fit an installation component.
The large working surface of the painted carbon steel body is covered with wear-resistant diamond grit, allowing hard materials to be processed.
The M14 fitting is suitable for direct attachment to an angle grinder with an M14 thread.
The milling bit is suitable for working on ceramic tiles, gres porcelain tiles, sintered quartz, natural stone and other hard building and finishing materials.
It can be used to prepare and adjust holes for pipes, conduits, taps, drains and other components installed in ceramic or stone cladding.
Shipping & Delivery
Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.
YATO diamond milling bit 9–38 mm, M14
YT-61787