YATO digital multimeter 0–600 V AC/DC, 0–10 A

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Dimensions: 126 x 70 x 26 mm
Material: ABS
Application: electrical work
Operating temperature range: 0–40 ˚C
Storage temperature: -10 to +50 ˚C
Power supply: battery
Battery type: 2 × 1,5 V, AAA
Weight: 0,14 kg
Display type: LCD
Circuit continuity test: 0–30 Ω
Conductivity test: yes
AC voltage: 0–600 V AC
DC voltage: 0–600 V DC
DC current: 0–10 A
Resistance: 0–2 MΩ
Transistor hFE test: PNP, NPN
Diode test: yes
Sine wave generator: 5 V p-p
Sampling rate: 2–3 times per second
Audible signal: yes
Display range: 1999 mm
Square-wave signal generator: 50 Hz
The YATO digital multimeter 0–600 V AC/DC and 0–10 A is designed for measuring voltage, current and resistance during electrical work, and for testing electrical components.
Measurements and tests
The device can measure AC and DC voltage, DC current and resistance. The diode test specifications are IF 1 mA and UR 3 V. The continuity test gives an audible signal when the resistance is below 30 Ω. It can also test PNP and NPN transistors in the hFE range of 0–1000.
Measurement accuracy
When evaluating a measurement result, the accuracy and resolution of the measuring instrument must be taken into account.
When measuring AC voltage, the accuracy in the selected range is ±(2% + 10) and the resolution is 1 V.
For a reading of 235 V, the calculation is (235 × 2%) + (10 × 1 V) = 14,7 V, giving a result including measurement error of 235 ± 14,7 V.
For a DC voltage reading of 12 V, the result including measurement error is 12 ± 0,146 V.
The resolution and accuracy table for each measurement is provided in the user manual.
The measuring instrument does not have a True RMS function, so an AC voltage measurement corresponds to the actual RMS value only when the waveform is a proper sine wave.
Signal generator and reading hold
When the selector switch is set to the signal generation position, the multimeter outputs a square-wave signal at a frequency of approximately 50 Hz, with a peak-to-peak voltage of 5 Vpp.
The signal can be used, for example, to diagnose speakers in audio equipment.
The DATA HOLD [H] function holds the measured reading on the display.
Display and protection
The maximum reading displayed on the LCD is 1999.
If the circuit resistance is below 30 Ω, the diode test automatically switches to the continuity test; the device cannot be used in diode test mode only.
The multimeter has overload protection and a low battery indicator.
The rubber protective cover, or holster, around the ABS housing helps protect the device from mechanical damage.
Test leads are included.
Power supply
The device operates on two 1,5 V AAA batteries.
Dimensions: 126 x 70 x 26 mm
Material: ABS
Application: electrical work
Operating temperature range: 0–40 ˚C
Storage temperature: -10 to +50 ˚C
Power supply: battery
Battery type: 2 × 1,5 V, AAA
Weight: 0,14 kg
Display type: LCD
Circuit continuity test: 0–30 Ω
Conductivity test: yes
AC voltage: 0–600 V AC
DC voltage: 0–600 V DC
DC current: 0–10 A
Resistance: 0–2 MΩ
Transistor hFE test: PNP, NPN
Diode test: yes
Sine wave generator: 5 V p-p
Sampling rate: 2–3 times per second
Audible signal: yes
Display range: 1999 mm
Square-wave signal generator: 50 Hz
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
The YATO digital multimeter 0–600 V AC/DC and 0–10 A is designed for measuring voltage, current and resistance during electrical work, and for testing electrical components.
Measurements and tests
The device can measure AC and DC voltage, DC current and resistance. The diode test specifications are IF 1 mA and UR 3 V. The continuity test gives an audible signal when the resistance is below 30 Ω. It can also test PNP and NPN transistors in the hFE range of 0–1000.
Measurement accuracy
When evaluating a measurement result, the accuracy and resolution of the measuring instrument must be taken into account.
When measuring AC voltage, the accuracy in the selected range is ±(2% + 10) and the resolution is 1 V.
For a reading of 235 V, the calculation is (235 × 2%) + (10 × 1 V) = 14,7 V, giving a result including measurement error of 235 ± 14,7 V.
For a DC voltage reading of 12 V, the result including measurement error is 12 ± 0,146 V.
The resolution and accuracy table for each measurement is provided in the user manual.
The measuring instrument does not have a True RMS function, so an AC voltage measurement corresponds to the actual RMS value only when the waveform is a proper sine wave.
Signal generator and reading hold
When the selector switch is set to the signal generation position, the multimeter outputs a square-wave signal at a frequency of approximately 50 Hz, with a peak-to-peak voltage of 5 Vpp.
The signal can be used, for example, to diagnose speakers in audio equipment.
The DATA HOLD [H] function holds the measured reading on the display.
Display and protection
The maximum reading displayed on the LCD is 1999.
If the circuit resistance is below 30 Ω, the diode test automatically switches to the continuity test; the device cannot be used in diode test mode only.
The multimeter has overload protection and a low battery indicator.
The rubber protective cover, or holster, around the ABS housing helps protect the device from mechanical damage.
Test leads are included.
Power supply
The device operates on two 1,5 V AAA batteries.
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO digital multimeter 0–600 V AC/DC, 0–10 A
YT-73080