YATO Solder Sleeve Set 0,5–1,5 mm², 30-piece

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Application: for permanent and waterproof connection of electrical wires
Length: 40 mm
Colour: red
Melting temperature: 105 °C
Inner diameter: 2,7 mm
Quantity: 30
Shrinking temperature: 80 °C
Solder material: tin
Heat-shrink sleeve material: EP
Wire cross-section: 0,5–1,5 mm², 18–16 AWG
The YATO heat-shrink sleeve set with solder rings is designed for connecting and insulating electrical wires with a cross-section of 0,5–1,5 mm².
The solder ring in the centre of the sleeve melts when heated, allowing the solder to flow between the wire strands and helping create a strong soldered connection.
The two hot-melt adhesive rings on the sides of the sleeve melt and seal the connection.
Polyethylene construction
The sleeves are made of polyethylene (PE).
Its shrink ratio is 3:1, compared with 2:1 for PVC.
The greater shrinkage helps the sleeve fit more closely around the wire and allows a larger-diameter sleeve to be used, making it easier to install on the wire.
PE remains flexible even in sub-zero temperatures, while PVC can become stiff and crack in the cold.
The material is resistant to abrasion, punctures and chemicals.
The sleeves are also suitable for use in changing weather conditions and hot environments, such as beneath a hot car body or near an engine.
Solder and sealing
The solder inside the sleeve enables a proper soldered connection to be made.
The specially shaped hot-melt adhesive seals the connection and retains some flexibility after hardening, without becoming brittle over time.
Application: for permanent and waterproof connection of electrical wires
Length: 40 mm
Colour: red
Melting temperature: 105 °C
Inner diameter: 2,7 mm
Quantity: 30
Shrinking temperature: 80 °C
Solder material: tin
Heat-shrink sleeve material: EP
Wire cross-section: 0,5–1,5 mm², 18–16 AWG
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
The YATO heat-shrink sleeve set with solder rings is designed for connecting and insulating electrical wires with a cross-section of 0,5–1,5 mm².
The solder ring in the centre of the sleeve melts when heated, allowing the solder to flow between the wire strands and helping create a strong soldered connection.
The two hot-melt adhesive rings on the sides of the sleeve melt and seal the connection.
Polyethylene construction
The sleeves are made of polyethylene (PE).
Its shrink ratio is 3:1, compared with 2:1 for PVC.
The greater shrinkage helps the sleeve fit more closely around the wire and allows a larger-diameter sleeve to be used, making it easier to install on the wire.
PE remains flexible even in sub-zero temperatures, while PVC can become stiff and crack in the cold.
The material is resistant to abrasion, punctures and chemicals.
The sleeves are also suitable for use in changing weather conditions and hot environments, such as beneath a hot car body or near an engine.
Solder and sealing
The solder inside the sleeve enables a proper soldered connection to be made.
The specially shaped hot-melt adhesive seals the connection and retains some flexibility after hardening, without becoming brittle over time.
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO Solder Sleeve Set 0,5–1,5 mm², 30-piece
YT-81441