YATO cable locator and network cable tester RJ11/RJ45, over 1 km

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Dimensions: 63 x 134 x 31 mm (transmitter), 40 x 200 x 32 mm (receiver)
Material: ABS
Intended use: For checking and locating cabling
Laser: No
Operating temperature range: -10 to +40 °C
Storage temperature: -10 to +40 °C
Power supply: Battery
Battery type: 3 × 1,5 V AAA (transmitter), 9 V 6F22 (receiver)
Weight: 138 g (transmitter), 120 g (receiver)
Display type: LED
Functions: Determining the location and route of a cable, locating a cable break, checking the order of RJ45 cable connections, checking telephone line voltage
Front light: Yes
Operating relative humidity Rh: 10–95 %
Low battery indicator: Yes
Functions (continued): Checking telephone line voltage polarity, checking for a short circuit, adjusting signal tracking sensitivity and volume
Signal transmission range: Over 1 km
Headphone jack: For connecting headphones
The YATO cable locator and network cable tester RJ11/RJ45 is designed to locate wires and check cabling.
The transmitter sends a signal through the wire being searched for over a distance of more than 1 km.
Transmitter and receiver
The device consists of a transmitter and a receiver.
When the transmitter is connected to the wire being searched for and the SCAN function is activated, it sends a signal at a specific frequency through the wire, which the receiver detects.
The receiver picks up the signal wirelessly from near the wire.
In indoor tests, it detected the signal from a distance of 15 cm when there were no obstacles between the receiver and the wire.
The receiver is interference-resistant and converts the received signal into sound without noise or crackling.
When tracking the signal, the receiver's sensitivity and volume can be adjusted.
The headphone jack allows headphones to be connected.
Checking wires and lines
The cable locator can determine the location and route of a wire and find a break in it.
It helps identify a network cable, for example in a server room, and find a break in a vehicle's electrical system.
The RJ45 tester checks the order of the cable connections.
When checking a telephone line, you can measure the voltage and check its polarity.
The device can also detect the presence of a short circuit.
Important limitation
When locating wires in walls, including for safety purposes, the wire being searched for must not be live with mains voltage.
The receiver gets a stronger signal if one of the transmitter's crocodile clips is connected to ground.
For grounding, you can use the grounding wire in a domestic electrical installation or, if no other options are available, a person touching the floor.
Dimensions: 63 x 134 x 31 mm (transmitter), 40 x 200 x 32 mm (receiver)
Material: ABS
Intended use: For checking and locating cabling
Laser: No
Operating temperature range: -10 to +40 °C
Storage temperature: -10 to +40 °C
Power supply: Battery
Battery type: 3 × 1,5 V AAA (transmitter), 9 V 6F22 (receiver)
Weight: 138 g (transmitter), 120 g (receiver)
Display type: LED
Functions: Determining the location and route of a cable, locating a cable break, checking the order of RJ45 cable connections, checking telephone line voltage
Front light: Yes
Operating relative humidity Rh: 10–95 %
Low battery indicator: Yes
Functions (continued): Checking telephone line voltage polarity, checking for a short circuit, adjusting signal tracking sensitivity and volume
Signal transmission range: Over 1 km
Headphone jack: For connecting headphones
Transmitter
Receiver
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
The YATO cable locator and network cable tester RJ11/RJ45 is designed to locate wires and check cabling.
The transmitter sends a signal through the wire being searched for over a distance of more than 1 km.
Transmitter and receiver
The device consists of a transmitter and a receiver.
When the transmitter is connected to the wire being searched for and the SCAN function is activated, it sends a signal at a specific frequency through the wire, which the receiver detects.
The receiver picks up the signal wirelessly from near the wire.
In indoor tests, it detected the signal from a distance of 15 cm when there were no obstacles between the receiver and the wire.
The receiver is interference-resistant and converts the received signal into sound without noise or crackling.
When tracking the signal, the receiver's sensitivity and volume can be adjusted.
The headphone jack allows headphones to be connected.
Checking wires and lines
The cable locator can determine the location and route of a wire and find a break in it.
It helps identify a network cable, for example in a server room, and find a break in a vehicle's electrical system.
The RJ45 tester checks the order of the cable connections.
When checking a telephone line, you can measure the voltage and check its polarity.
The device can also detect the presence of a short circuit.
Important limitation
When locating wires in walls, including for safety purposes, the wire being searched for must not be live with mains voltage.
The receiver gets a stronger signal if one of the transmitter's crocodile clips is connected to ground.
For grounding, you can use the grounding wire in a domestic electrical installation or, if no other options are available, a person touching the floor.
What's in the box
Transmitter
Receiver
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO cable locator and network cable tester RJ11/RJ45, over 1 km
YT-73137