YATO laminate guillotine 230 mm

Material: aluminum; HSS W5

Finish: Powder coated

Length: 650 mm

Cutting angles: 15°, 22.5°, 30° and 45°

Max thickness: 15 mm

Max cutting length: 230 mm

Dimensions: 650x460 mm

Guillotine for cutting floor panels, with a cutting width of 230 mm and a maximum material thickness of 15 mm.

The guillotine blade is built into aluminum profiles, which are mounted on vertical steel pedestals.

The length of the pressure fork is about 650 mm.

The work surface is made of hard and wear-resistant plastic and its dimensions are 460 mm x 650 mm.

The built-in angle iron on the table allows cutting at angles: 15°, 22.5°, 30° and 45°.

The guillotine is designed for cutting floor panels, vinyl panels, parquet, rubber, foam plastic, PVC, VCT tiles and more.

To use the machine, place the workpiece on the table between the knife fasteners.

Then gently press the lever, lowering the blade onto the material and pressing down to cut the desired cut.

Due to the exceptional sharpness of the knife, you must be especially careful when working.