YATO mortar and putty sprayer 3000 W, 40 l/min

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Application: Spraying cement and gypsum plaster, mechanically applying plaster to walls and ceilings, feeding suitable concrete mixes
Rotational speed: 2600 min⁻¹
Weight: 122 kg
Voltage: 220–240 V AC
Power: 3000 W
Hose length: 7 m
Protection rating: IP55
Frequency: 50/60 Hz
Sound pressure: 82–87 dB(A)
Sound power: 92–97 dB(A)
Operating mode switch: yes
Wheels: yes
Number of wheels: 4
Vibration: 4,0–5,5 m/s²
Operating modes: Auto (spraying), Relief (pressure release and material retraction), Clean (system cleaning and flushing)
Tank capacity: 40 l
Maximum working pressure: 0,6 MPa
Temperature of material to be applied: 5–40 °C
Application (continued): Applying other materials specified by the manufacturer for mechanical application, plastering, renovation, and finishing work
Maximum material feed height: 20 m
Maximum material grain size: ≤3 mm
YATO mortar and putty sprayer 3000 W, 40 l/min is an electric unit for mechanically feeding and spraying building materials.
It is suitable for applying cement and gypsum plaster and putty, feeding suitable concrete mixes, and other work for which the manufacturer specifies machine application.
The device is used in construction, plastering, and finishing work to treat walls, ceilings, and other surfaces.
Material can be applied to larger work areas and delivered up to a height of 20 m.
The 40-litre tank reduces the need to replenish material during work.
Material feeding and spraying
The 3000 W motor and 0,6 MPa working pressure allow material to be fed mechanically.
The adjustable feed rate lets you adapt the amount of material to its properties and the spraying conditions.
Work can begin at a low or medium speed, which can be increased until the desired spraying result is achieved.
Controls and operating modes
The operating mode switch has three modes: Auto for normal spraying, Relief to release pressure and retract material, and Clean to clean and flush the system.
The gun's air valve allows the air supply to be controlled separately.
In Auto mode, the trigger starts and stops the material feed.
Moving and positioning
The transport handle, pneumatic wheels, and lockable swivel wheels make it easier to move the unit around the construction site and keep it in place while working.
The recommended tire pressure for the pneumatic wheels is 2,5–2,8 bar.
IP55 protection protects against dust ingress and water jets.
Use only with materials suitable for mechanical application with this device.
The maximum material grain size is 3 mm and the operating temperature is 5–40 °C.
The device must be connected to an external compressed air source.
Application: Spraying cement and gypsum plaster, mechanically applying plaster to walls and ceilings, feeding suitable concrete mixes
Rotational speed: 2600 min⁻¹
Weight: 122 kg
Voltage: 220–240 V AC
Power: 3000 W
Hose length: 7 m
Protection rating: IP55
Frequency: 50/60 Hz
Sound pressure: 82–87 dB(A)
Sound power: 92–97 dB(A)
Operating mode switch: yes
Wheels: yes
Number of wheels: 4
Vibration: 4,0–5,5 m/s²
Operating modes: Auto (spraying), Relief (pressure release and material retraction), Clean (system cleaning and flushing)
Tank capacity: 40 l
Maximum working pressure: 0,6 MPa
Temperature of material to be applied: 5–40 °C
Application (continued): Applying other materials specified by the manufacturer for mechanical application, plastering, renovation, and finishing work
Maximum material feed height: 20 m
Maximum material grain size: ≤3 mm
Spray gun
Hose for connecting the gun to the unit
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
YATO mortar and putty sprayer 3000 W, 40 l/min is an electric unit for mechanically feeding and spraying building materials.
It is suitable for applying cement and gypsum plaster and putty, feeding suitable concrete mixes, and other work for which the manufacturer specifies machine application.
The device is used in construction, plastering, and finishing work to treat walls, ceilings, and other surfaces.
Material can be applied to larger work areas and delivered up to a height of 20 m.
The 40-litre tank reduces the need to replenish material during work.
Material feeding and spraying
The 3000 W motor and 0,6 MPa working pressure allow material to be fed mechanically.
The adjustable feed rate lets you adapt the amount of material to its properties and the spraying conditions.
Work can begin at a low or medium speed, which can be increased until the desired spraying result is achieved.
Controls and operating modes
The operating mode switch has three modes: Auto for normal spraying, Relief to release pressure and retract material, and Clean to clean and flush the system.
The gun's air valve allows the air supply to be controlled separately.
In Auto mode, the trigger starts and stops the material feed.
Moving and positioning
The transport handle, pneumatic wheels, and lockable swivel wheels make it easier to move the unit around the construction site and keep it in place while working.
The recommended tire pressure for the pneumatic wheels is 2,5–2,8 bar.
IP55 protection protects against dust ingress and water jets.
Use only with materials suitable for mechanical application with this device.
The maximum material grain size is 3 mm and the operating temperature is 5–40 °C.
The device must be connected to an external compressed air source.
What's in the box
Spray gun
Hose for connecting the gun to the unit
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO mortar and putty sprayer 3000 W, 40 l/min
YT-82584