YATO multimeter TRUE RMS 0–600 V, 0–10 A

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Dimensions: 150 x 70 x 50 mm
Material: ABS
Application: Electrical work
Operating temperature: 0–40 °C
Storage temperature: −10 to +50 °C
Power supply: Battery
Battery type: 2 × 1,5 V, AAA
Weight: 0,2 kg
Display type: LCD
Data hold: Yes
Continuity test: 0–30 Ω
Conductivity test: Yes
LED backlight: Yes
Front light: Yes
Fuse: F630 mA H250 V, F10 A L250 V
AC voltage: 0–600 V AC
DC voltage: 0–600 V DC
DC current: 0–10 A
Resistance: 0–99 MΩ
Diode test: Yes
Battery test: 1,5 V DC, 9 V DC
AC current: 0–10 A
Capacitance: 0–99 mF
Frequency: 0,01–60 kHz
Measurement rate: 2–3 times per second
TRUE RMS: Yes
Automatic measurement range selection: Yes
Audible signal: Yes
Display range: 9999
Automatic shut-off: Yes
Non-contact AC voltage detection NCV: Yes
VFC low-pass filter: Yes
The YATO YT-73094 digital multimeter with TRUE RMS function is designed for electrical measurements and measures AC and DC voltage up to 600 V and AC and DC current up to 10 A.
The device can also measure resistance, capacitance and frequency, and perform diode and circuit continuity tests.
TRUE RMS displays the actual RMS value of AC voltage and current, even with distorted sine, square and triangular waveforms.
This is useful, for example, when taking measurements on switching power supplies, motors with frequency converters and HVAC equipment.
During a continuity test, the device emits an audible signal when resistance is below 30 Ω.
If the circuit resistance is below 50 Ω during a diode test, the device automatically switches to continuity test mode.
The multimeter cannot be set to diode test mode only.
Non-contact voltage detection and VFC filter
The NCV function inductively detects the presence of AC voltage, including in an insulated wire, and helps locate the phase conductor.
The VFC low-pass filter is suitable, for example, for measuring the output voltage of a motor controlled by a frequency converter.
The filter reduces high-frequency interference, such as that caused by a PWM signal, while allowing low frequencies through.
This makes it possible to measure the RMS value of the voltage or current reaching the motor.
Battery load test
When testing 1,5 V and 9 V batteries, the multimeter applies a small load current to assess whether they can power a device.
For a more accurate assessment, first measure the DC voltage and compare the result with the battery test reading.
A significant voltage drop or low voltage indicates that the battery needs to be replaced.
The test uses a load resistance of approximately 30 Ω for a 1,5 V battery and approximately 300 Ω for a 9 V battery.
Measurement range selection and control
The device starts in automatic measurement range selection mode and finds a suitable range for the measured value.
Manually selecting the measurement range is useful when measuring many components with the same known value in succession and can speed up this work.
The SEL button switches between measurement modes, for example, between AC and DC voltage measurement.
DATA HOLD keeps the measured reading on the display.
The multimeter has an LCD with a maximum display reading of 9999, display backlighting and a lighting function.
The housing has overload protection.
The rubber protective cover surrounding the ABS plastic housing helps protect the device from mechanical damage.
The multimeter switches off automatically and indicates when the battery is low.
Test leads are included.
Measurement accuracy examples
For an AC voltage reading of 235 V, the accuracy in this measurement range is ±(1,2% + 3) and the resolution is 0,1 V.
The measurement error is calculated using the formula: measurement result × 1,2% + 3 × resolution.
The example calculation is (235 × 1,2%) + (3 × 0,1) = 2,82 + 0,3 = 3,12 V, so the actual result is 235 ± 3,12 V.
For a DC voltage reading of 12 V, the result including measurement error is 12 ± 0,114 V, and for an AC current reading of 8 A, it is 8 ± 0,15 A.
The table of measurement range resolutions and accuracies is in the user manual.
Dimensions: 150 x 70 x 50 mm
Material: ABS
Application: Electrical work
Operating temperature: 0–40 °C
Storage temperature: −10 to +50 °C
Power supply: Battery
Battery type: 2 × 1,5 V, AAA
Weight: 0,2 kg
Display type: LCD
Data hold: Yes
Continuity test: 0–30 Ω
Conductivity test: Yes
LED backlight: Yes
Front light: Yes
Fuse: F630 mA H250 V, F10 A L250 V
AC voltage: 0–600 V AC
DC voltage: 0–600 V DC
DC current: 0–10 A
Resistance: 0–99 MΩ
Diode test: Yes
Battery test: 1,5 V DC, 9 V DC
AC current: 0–10 A
Capacitance: 0–99 mF
Frequency: 0,01–60 kHz
Measurement rate: 2–3 times per second
TRUE RMS: Yes
Automatic measurement range selection: Yes
Audible signal: Yes
Display range: 9999
Automatic shut-off: Yes
Non-contact AC voltage detection NCV: Yes
VFC low-pass filter: Yes
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
The YATO YT-73094 digital multimeter with TRUE RMS function is designed for electrical measurements and measures AC and DC voltage up to 600 V and AC and DC current up to 10 A.
The device can also measure resistance, capacitance and frequency, and perform diode and circuit continuity tests.
TRUE RMS displays the actual RMS value of AC voltage and current, even with distorted sine, square and triangular waveforms.
This is useful, for example, when taking measurements on switching power supplies, motors with frequency converters and HVAC equipment.
During a continuity test, the device emits an audible signal when resistance is below 30 Ω.
If the circuit resistance is below 50 Ω during a diode test, the device automatically switches to continuity test mode.
The multimeter cannot be set to diode test mode only.
Non-contact voltage detection and VFC filter
The NCV function inductively detects the presence of AC voltage, including in an insulated wire, and helps locate the phase conductor.
The VFC low-pass filter is suitable, for example, for measuring the output voltage of a motor controlled by a frequency converter.
The filter reduces high-frequency interference, such as that caused by a PWM signal, while allowing low frequencies through.
This makes it possible to measure the RMS value of the voltage or current reaching the motor.
Battery load test
When testing 1,5 V and 9 V batteries, the multimeter applies a small load current to assess whether they can power a device.
For a more accurate assessment, first measure the DC voltage and compare the result with the battery test reading.
A significant voltage drop or low voltage indicates that the battery needs to be replaced.
The test uses a load resistance of approximately 30 Ω for a 1,5 V battery and approximately 300 Ω for a 9 V battery.
Measurement range selection and control
The device starts in automatic measurement range selection mode and finds a suitable range for the measured value.
Manually selecting the measurement range is useful when measuring many components with the same known value in succession and can speed up this work.
The SEL button switches between measurement modes, for example, between AC and DC voltage measurement.
DATA HOLD keeps the measured reading on the display.
The multimeter has an LCD with a maximum display reading of 9999, display backlighting and a lighting function.
The housing has overload protection.
The rubber protective cover surrounding the ABS plastic housing helps protect the device from mechanical damage.
The multimeter switches off automatically and indicates when the battery is low.
Test leads are included.
Measurement accuracy examples
For an AC voltage reading of 235 V, the accuracy in this measurement range is ±(1,2% + 3) and the resolution is 0,1 V.
The measurement error is calculated using the formula: measurement result × 1,2% + 3 × resolution.
The example calculation is (235 × 1,2%) + (3 × 0,1) = 2,82 + 0,3 = 3,12 V, so the actual result is 235 ± 3,12 V.
For a DC voltage reading of 12 V, the result including measurement error is 12 ± 0,114 V, and for an AC current reading of 8 A, it is 8 ± 0,15 A.
The table of measurement range resolutions and accuracies is in the user manual.
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO multimeter TRUE RMS 0–600 V, 0–10 A
YT-73094