YATO voltage tester 6–1000 V AC/DC, RCD test

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Dimensions: 280 x 74 x 34 mm
Application: Electrical work
Operating temperature: −10 °C to +50 °C
Storage temperature: −10 °C to +50 °C
Power supply: Battery
Battery type: 2 × 1,5 V; AAA
Weight: 285 g
Protection rating: IP64
Measurement accuracy: ± (3% + 5)
Display resolution: 1 V AC/DC
Display type: LCD
Relative humidity during use: <85%
AC voltage: 6–1000 V AC
DC voltage: 6–1000 V DC
Resistance: 0–1999 Ω
Automatic measuring range selection: Yes
Audible signal: Yes
Response time: With LED indicators <1 s; with LCD display ≤1 s
Display range: 1999
LED indication thresholds: 12, 24, 50, 120, 230, 400, 690, 1000 V AC/DC
Automatic activation: With LED indicators ≥12 V AC/DC; with LCD display ≥6 V AC/DC
Phase sequence test: Yes
Low-impedance voltage test mode: Yes; approximately 7 kΩ (for noise suppression)
Voltage detection: Yes; mechanical
Polarity detection: Yes; throughout the entire range
RCD trip: ~30 mA / 230 V
Maximum measurement duration: 30 s
Recovery time between RCD tests: 240 s
Peak current Is (load): 150 mA
Impedance / peak current: 350 kΩ / Is <3,5 mA (does not trip the RCD)
The YATO two-pole voltage tester YT-28330 is designed to measure AC and DC voltage in the range of 6–1000 V.
In a three-phase system, the phase sequence check helps determine the phase order.
Flexible silicone-insulated leads and a built-in LED light support use during electrical measurements. The housing meets overvoltage categories CAT III 1000 V and CAT IV 600 V.
Dimensions: 280 x 74 x 34 mm
Application: Electrical work
Operating temperature: −10 °C to +50 °C
Storage temperature: −10 °C to +50 °C
Power supply: Battery
Battery type: 2 × 1,5 V; AAA
Weight: 285 g
Protection rating: IP64
Measurement accuracy: ± (3% + 5)
Display resolution: 1 V AC/DC
Display type: LCD
Relative humidity during use: <85%
AC voltage: 6–1000 V AC
DC voltage: 6–1000 V DC
Resistance: 0–1999 Ω
Automatic measuring range selection: Yes
Audible signal: Yes
Response time: With LED indicators <1 s; with LCD display ≤1 s
Display range: 1999
LED indication thresholds: 12, 24, 50, 120, 230, 400, 690, 1000 V AC/DC
Automatic activation: With LED indicators ≥12 V AC/DC; with LCD display ≥6 V AC/DC
Phase sequence test: Yes
Low-impedance voltage test mode: Yes; approximately 7 kΩ (for noise suppression)
Voltage detection: Yes; mechanical
Polarity detection: Yes; throughout the entire range
RCD trip: ~30 mA / 230 V
Maximum measurement duration: 30 s
Recovery time between RCD tests: 240 s
Peak current Is (load): 150 mA
Impedance / peak current: 350 kΩ / Is <3,5 mA (does not trip the RCD)
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
The YATO two-pole voltage tester YT-28330 is designed to measure AC and DC voltage in the range of 6–1000 V.
In a three-phase system, the phase sequence check helps determine the phase order.
Flexible silicone-insulated leads and a built-in LED light support use during electrical measurements. The housing meets overvoltage categories CAT III 1000 V and CAT IV 600 V.
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO voltage tester 6–1000 V AC/DC, RCD test
YT-28330