YATO SDS-max hammer drill 1600 W, 18 J, 8,5 kg

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
The YATO YT-82129 1600 W corded SDS-max hammer drill is designed for working with concrete and other hard mineral materials in construction, installation and repair work.
The motor power and SDS-max fitting make it suitable for demanding drilling and chiselling tasks.
The tool weighs 8,5 kg.
Operating modes and control
The hammer drill has two operating modes: hammer drilling and chiselling.
Electronic speed stabilisation helps maintain consistent operating parameters under load.
The rotation speed is 270–450 p/min and the impact rate is 2100–3500 blows per minute.
ETC (Electronic Torque Control) electronically controls the clutch torque.
If the drill bit jams, the system stops the tool and helps reduce the risk of sudden rotation.
This is useful when drilling into reinforced concrete floor slabs, where the drill bit may jam on encountering rebar.
The system also helps improve control of the tool during installation work at height, for example on a ladder or scaffolding.
Accessories and power cord
The SDS-max chuck is suitable for using drills and chisels compatible with this system and allows accessories to be changed.
The 3 m power cord provides room to move while handling the tool in the work area.
Applications
The hammer drill is suitable for drilling concrete with a spiral drill bit, hammer drilling reinforced concrete and chiselling concrete quickly.
It can be used for installation and assembly work requiring holes of a large diameter or length.
For demolition and repair work, it can be used to demolish partition walls, make installation openings, remove high spots from concrete surfaces with a concrete scabbling hammer, and level stair surfaces.
The YATO YT-82129 1600 W corded SDS-max hammer drill is designed for working with concrete and other hard mineral materials in construction, installation and repair work.
The motor power and SDS-max fitting make it suitable for demanding drilling and chiselling tasks.
The tool weighs 8,5 kg.
Operating modes and control
The hammer drill has two operating modes: hammer drilling and chiselling.
Electronic speed stabilisation helps maintain consistent operating parameters under load.
The rotation speed is 270–450 p/min and the impact rate is 2100–3500 blows per minute.
ETC (Electronic Torque Control) electronically controls the clutch torque.
If the drill bit jams, the system stops the tool and helps reduce the risk of sudden rotation.
This is useful when drilling into reinforced concrete floor slabs, where the drill bit may jam on encountering rebar.
The system also helps improve control of the tool during installation work at height, for example on a ladder or scaffolding.
Accessories and power cord
The SDS-max chuck is suitable for using drills and chisels compatible with this system and allows accessories to be changed.
The 3 m power cord provides room to move while handling the tool in the work area.
Applications
The hammer drill is suitable for drilling concrete with a spiral drill bit, hammer drilling reinforced concrete and chiselling concrete quickly.
It can be used for installation and assembly work requiring holes of a large diameter or length.
For demolition and repair work, it can be used to demolish partition walls, make installation openings, remove high spots from concrete surfaces with a concrete scabbling hammer, and level stair surfaces.
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO SDS-max hammer drill 1600 W, 18 J, 8,5 kg
YT-82129