YATO clamp multimeter TRUE RMS AC/DC 10 mA–600 A

Official YATO Dealer
- 100% genuine products
- Manufacturer warranty
- Professional consultation
Technical Specifications
Dimensions: 185 × 65 × 30 mm
Material: ABS
Application: electrical work
Operating temperature range: 0–40 ˚C
Storage temperature: −10 to +50 ˚C
Power supply: battery
Battery type: 2 × 1,5 V; AAA
Weight: 0,165 kg
Display type: LCD
Reading hold: yes
Continuity test: 0–50 Ω
Conductivity test: yes
LED backlight: yes
Front light: yes
Relative humidity during operation Rh: <75%
Low battery indicator: yes
AC voltage: 0–600 V AC
DC voltage: 0–600 V DC
DC current: 0–600 A
Resistance: 0–60 MΩ
Diode test: yes
Battery test: yes
AC current: 0–600 A
Capacitance: 0–60 mF
Frequency: 0–300 kHz
Temperature: −30 to +1000 ˚C
Sampling rate: 3 times per second
TRUE RMS: yes
Automatic range: yes
Maximum clamp opening: 25 mm
Maximum cable diameter for clamp measurement: 25 mm
Audible signal: yes
Display reading range: 6000
Automatic power-off: 15 min
Non-contact AC voltage detection NCV: yes
Measured peak value hold mode: yes
The YATO TRUE RMS clamp multimeter YT-730934 is a measuring instrument designed for electrical work, capable of measuring current from 10 mA to 600 A.
Automatic range selection adapts to the measured value.
The clamp with a built-in Hall sensor measures AC and DC current in a single conductor without interrupting the circuit or disconnecting the device from the power supply.
Measurement functions
The measuring instrument measures AC voltage from 0–600 V and AC current from 0–600 A with the TRUE RMS function at a frequency of 40–1000 Hz.
The DC voltage measurement range is 0–600 V, and the DC current range is 0–600 A.
It can also measure resistance from 0–60 MΩ, capacitor capacitance from 0–60 mF, frequency from 0–300 kHz and temperature from −30 to +1000 °C.
The device can perform a diode test (IF 1,5 mA, UR 3 V), a circuit continuity test in the range of 0–50 Ω and a battery test. AC and DC voltage can also be measured in LowZ mode with low impedance, in the range of 0–600 V. The NCV function detects AC voltage without contact.
Measurement accuracy and TRUE RMS
Measurement accuracy depends on the measurement range, and the table of resolution and accuracy for each measurement is provided in the user manual.
For example, when measuring AC current at 30 A, the accuracy for this range is ±(2,0% + 30) and the resolution is 0,01 A.
According to the calculation, the measurement error is (30 × 2%) + (30 × 0,01 A) = 0,90 A, and the actual result is 30 ± 0,90 A.
For an AC voltage reading of 235 V, the result is 235 ± 2,65 V, and for a DC voltage reading of 12 V, it is 12 ± 0,09 V.
TRUE RMS displays the actual effective value of AC voltage and current.
Unlike measuring instruments that measure the average value, it gives an accurate result for sinusoidal as well as distorted sine, square or triangular waveforms.
This function is useful, for example, with switched-mode power supplies, motor drives with frequency converters and HVAC installations.
LowZ and non-contact voltage detection
LowZ mode enables AC and DC voltage measurement with low impedance.
So-called phantom voltage can make it difficult to check the electrical network, for example in industrial buildings: a disconnected wire may become energized by a live wire in the same conduit.
LowZ reduces the impedance of the test leads tenfold compared to the standard measurement mode.
The measuring instrument then draws slightly more current and helps release the charge accumulated in the wire, so phantom voltage does not affect the measurement result.
NCV uses an inductive method to detect the presence of AC voltage without contact.
The function can detect voltage in an insulated wire and identify the phase wire.
Reading hold and current measurement
The AUTO function selects the measurement range automatically and is enabled by default.
DATA HOLD keeps the currently measured value on the display, while PEAK HOLD retains the highest value measured with the test probes.
The INRUSH function measures a device's startup current with the clamp over a period of 100 ms.
The REL function allows you to zero the reading and measure a relative value.
When measuring DC current, the reading may be non-zero even when there is no current being measured, due to the Hall sensor responding to the surrounding magnetic field.
The REL function allows you to zero this reading before measurement.
Display, clamp and construction
The LCD display has a maximum reading of 6000.
The display and the clamp area are illuminated.
During a continuity test, the measuring instrument emits an audible signal when the resistance is below 50 Ω.
The diode test and continuity test can be enabled separately.
The clamp opening is up to 25 mm wide and allows measurement of a single wire with a diameter of up to 25 mm.
When measuring current around a multicore cable without separating an individual core, the result may be incorrect or indicate no current.
The test probes are 14,5 cm long; the lead with probes is 97 cm long, and the diameter of the insulated wire is 3,5 mm.
The test probe leads have flexible, high-temperature-resistant silicone insulation.
The measuring instrument has overload protection and a low battery indicator.
The device switches off automatically after 15 minutes of inactivity; this function can be disabled.
It is powered by two 1,5 V AAA batteries.
A storage bag is included.
Dimensions: 185 × 65 × 30 mm
Material: ABS
Application: electrical work
Operating temperature range: 0–40 ˚C
Storage temperature: −10 to +50 ˚C
Power supply: battery
Battery type: 2 × 1,5 V; AAA
Weight: 0,165 kg
Display type: LCD
Reading hold: yes
Continuity test: 0–50 Ω
Conductivity test: yes
LED backlight: yes
Front light: yes
Relative humidity during operation Rh: <75%
Low battery indicator: yes
AC voltage: 0–600 V AC
DC voltage: 0–600 V DC
DC current: 0–600 A
Resistance: 0–60 MΩ
Diode test: yes
Battery test: yes
AC current: 0–600 A
Capacitance: 0–60 mF
Frequency: 0–300 kHz
Temperature: −30 to +1000 ˚C
Sampling rate: 3 times per second
TRUE RMS: yes
Automatic range: yes
Maximum clamp opening: 25 mm
Maximum cable diameter for clamp measurement: 25 mm
Audible signal: yes
Display reading range: 6000
Automatic power-off: 15 min
Non-contact AC voltage detection NCV: yes
Measured peak value hold mode: yes
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.






Delivery time depends on stock
This product has no reviews yet. Be the first to rate it.
Product description
The YATO TRUE RMS clamp multimeter YT-730934 is a measuring instrument designed for electrical work, capable of measuring current from 10 mA to 600 A.
Automatic range selection adapts to the measured value.
The clamp with a built-in Hall sensor measures AC and DC current in a single conductor without interrupting the circuit or disconnecting the device from the power supply.
Measurement functions
The measuring instrument measures AC voltage from 0–600 V and AC current from 0–600 A with the TRUE RMS function at a frequency of 40–1000 Hz.
The DC voltage measurement range is 0–600 V, and the DC current range is 0–600 A.
It can also measure resistance from 0–60 MΩ, capacitor capacitance from 0–60 mF, frequency from 0–300 kHz and temperature from −30 to +1000 °C.
The device can perform a diode test (IF 1,5 mA, UR 3 V), a circuit continuity test in the range of 0–50 Ω and a battery test. AC and DC voltage can also be measured in LowZ mode with low impedance, in the range of 0–600 V. The NCV function detects AC voltage without contact.
Measurement accuracy and TRUE RMS
Measurement accuracy depends on the measurement range, and the table of resolution and accuracy for each measurement is provided in the user manual.
For example, when measuring AC current at 30 A, the accuracy for this range is ±(2,0% + 30) and the resolution is 0,01 A.
According to the calculation, the measurement error is (30 × 2%) + (30 × 0,01 A) = 0,90 A, and the actual result is 30 ± 0,90 A.
For an AC voltage reading of 235 V, the result is 235 ± 2,65 V, and for a DC voltage reading of 12 V, it is 12 ± 0,09 V.
TRUE RMS displays the actual effective value of AC voltage and current.
Unlike measuring instruments that measure the average value, it gives an accurate result for sinusoidal as well as distorted sine, square or triangular waveforms.
This function is useful, for example, with switched-mode power supplies, motor drives with frequency converters and HVAC installations.
LowZ and non-contact voltage detection
LowZ mode enables AC and DC voltage measurement with low impedance.
So-called phantom voltage can make it difficult to check the electrical network, for example in industrial buildings: a disconnected wire may become energized by a live wire in the same conduit.
LowZ reduces the impedance of the test leads tenfold compared to the standard measurement mode.
The measuring instrument then draws slightly more current and helps release the charge accumulated in the wire, so phantom voltage does not affect the measurement result.
NCV uses an inductive method to detect the presence of AC voltage without contact.
The function can detect voltage in an insulated wire and identify the phase wire.
Reading hold and current measurement
The AUTO function selects the measurement range automatically and is enabled by default.
DATA HOLD keeps the currently measured value on the display, while PEAK HOLD retains the highest value measured with the test probes.
The INRUSH function measures a device's startup current with the clamp over a period of 100 ms.
The REL function allows you to zero the reading and measure a relative value.
When measuring DC current, the reading may be non-zero even when there is no current being measured, due to the Hall sensor responding to the surrounding magnetic field.
The REL function allows you to zero this reading before measurement.
Display, clamp and construction
The LCD display has a maximum reading of 6000.
The display and the clamp area are illuminated.
During a continuity test, the measuring instrument emits an audible signal when the resistance is below 50 Ω.
The diode test and continuity test can be enabled separately.
The clamp opening is up to 25 mm wide and allows measurement of a single wire with a diameter of up to 25 mm.
When measuring current around a multicore cable without separating an individual core, the result may be incorrect or indicate no current.
The test probes are 14,5 cm long; the lead with probes is 97 cm long, and the diameter of the insulated wire is 3,5 mm.
The test probe leads have flexible, high-temperature-resistant silicone insulation.
The measuring instrument has overload protection and a low battery indicator.
The device switches off automatically after 15 minutes of inactivity; this function can be disabled.
It is powered by two 1,5 V AAA batteries.
A storage bag is included.
Shipping & Delivery






Delivery time depends on stock
Returns & Warranty
Product returns
14-day right of withdrawal. Terms for consumers and business customers.
Return instructionsWarranty
All products come with manufacturer warranty as required by law.
Reviews
This product has no reviews yet. Be the first to rate it.

YATO clamp multimeter TRUE RMS AC/DC 10 mA–600 A
YT-730934